--- /dev/null
- if ((ir->epc == epcMTTK) && (ir->etc > etcNO))
+/*
+ * This file is part of the GROMACS molecular simulation package.
+ *
+ * Copyright (c) 1991-2000, University of Groningen, The Netherlands.
+ * Copyright (c) 2001-2004, The GROMACS development team.
+ * Copyright (c) 2013,2014,2015, by the GROMACS development team, led by
+ * Mark Abraham, David van der Spoel, Berk Hess, and Erik Lindahl,
+ * and including many others, as listed in the AUTHORS file in the
+ * top-level source directory and at http://www.gromacs.org.
+ *
+ * GROMACS is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * GROMACS is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with GROMACS; if not, see
+ * http://www.gnu.org/licenses, or write to the Free Software Foundation,
+ * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * If you want to redistribute modifications to GROMACS, please
+ * consider that scientific software is very special. Version
+ * control is crucial - bugs must be traceable. We will be happy to
+ * consider code for inclusion in the official distribution, but
+ * derived work must not be called official GROMACS. Details are found
+ * in the README & COPYING files - if they are missing, get the
+ * official version at http://www.gromacs.org.
+ *
+ * To help us fund GROMACS development, we humbly ask that you cite
+ * the research papers on the package. Check out http://www.gromacs.org.
+ */
+#include "gmxpre.h"
+
+#include "readir.h"
+
+#include <ctype.h>
+#include <limits.h>
+#include <stdlib.h>
+
+#include <cmath>
+
+#include <algorithm>
+
+#include "gromacs/fileio/readinp.h"
+#include "gromacs/fileio/warninp.h"
+#include "gromacs/gmxlib/chargegroup.h"
+#include "gromacs/gmxlib/network.h"
+#include "gromacs/gmxpreprocess/toputil.h"
+#include "gromacs/math/functions.h"
+#include "gromacs/math/units.h"
+#include "gromacs/math/vec.h"
+#include "gromacs/mdlib/calc_verletbuf.h"
+#include "gromacs/mdtypes/inputrec.h"
+#include "gromacs/mdtypes/md_enums.h"
+#include "gromacs/mdtypes/pull-params.h"
+#include "gromacs/pbcutil/pbc.h"
+#include "gromacs/topology/block.h"
+#include "gromacs/topology/ifunc.h"
+#include "gromacs/topology/index.h"
+#include "gromacs/topology/mtop_util.h"
+#include "gromacs/topology/symtab.h"
+#include "gromacs/topology/topology.h"
+#include "gromacs/utility/cstringutil.h"
+#include "gromacs/utility/fatalerror.h"
+#include "gromacs/utility/smalloc.h"
+
+#define MAXPTR 254
+#define NOGID 255
+
+/* Resource parameters
+ * Do not change any of these until you read the instruction
+ * in readinp.h. Some cpp's do not take spaces after the backslash
+ * (like the c-shell), which will give you a very weird compiler
+ * message.
+ */
+
+typedef struct t_inputrec_strings
+{
+ char tcgrps[STRLEN], tau_t[STRLEN], ref_t[STRLEN],
+ acc[STRLEN], accgrps[STRLEN], freeze[STRLEN], frdim[STRLEN],
+ energy[STRLEN], user1[STRLEN], user2[STRLEN], vcm[STRLEN], x_compressed_groups[STRLEN],
+ couple_moltype[STRLEN], orirefitgrp[STRLEN], egptable[STRLEN], egpexcl[STRLEN],
+ wall_atomtype[STRLEN], wall_density[STRLEN], deform[STRLEN], QMMM[STRLEN],
+ imd_grp[STRLEN];
+ char fep_lambda[efptNR][STRLEN];
+ char lambda_weights[STRLEN];
+ char **pull_grp;
+ char **rot_grp;
+ char anneal[STRLEN], anneal_npoints[STRLEN],
+ anneal_time[STRLEN], anneal_temp[STRLEN];
+ char QMmethod[STRLEN], QMbasis[STRLEN], QMcharge[STRLEN], QMmult[STRLEN],
+ bSH[STRLEN], CASorbitals[STRLEN], CASelectrons[STRLEN], SAon[STRLEN],
+ SAoff[STRLEN], SAsteps[STRLEN], bTS[STRLEN], bOPT[STRLEN];
+ char efield_x[STRLEN], efield_xt[STRLEN], efield_y[STRLEN],
+ efield_yt[STRLEN], efield_z[STRLEN], efield_zt[STRLEN];
+
+} gmx_inputrec_strings;
+
+static gmx_inputrec_strings *is = NULL;
+
+void init_inputrec_strings()
+{
+ if (is)
+ {
+ gmx_incons("Attempted to call init_inputrec_strings before calling done_inputrec_strings. Only one inputrec (i.e. .mdp file) can be parsed at a time.");
+ }
+ snew(is, 1);
+}
+
+void done_inputrec_strings()
+{
+ sfree(is);
+ is = NULL;
+}
+
+
+enum {
+ egrptpALL, /* All particles have to be a member of a group. */
+ egrptpALL_GENREST, /* A rest group with name is generated for particles *
+ * that are not part of any group. */
+ egrptpPART, /* As egrptpALL_GENREST, but no name is generated *
+ * for the rest group. */
+ egrptpONE /* Merge all selected groups into one group, *
+ * make a rest group for the remaining particles. */
+};
+
+static const char *constraints[eshNR+1] = {
+ "none", "h-bonds", "all-bonds", "h-angles", "all-angles", NULL
+};
+
+static const char *couple_lam[ecouplamNR+1] = {
+ "vdw-q", "vdw", "q", "none", NULL
+};
+
+void init_ir(t_inputrec *ir, t_gromppopts *opts)
+{
+ snew(opts->include, STRLEN);
+ snew(opts->define, STRLEN);
+ snew(ir->fepvals, 1);
+ snew(ir->expandedvals, 1);
+ snew(ir->simtempvals, 1);
+}
+
+static void GetSimTemps(int ntemps, t_simtemp *simtemp, double *temperature_lambdas)
+{
+
+ int i;
+
+ for (i = 0; i < ntemps; i++)
+ {
+ /* simple linear scaling -- allows more control */
+ if (simtemp->eSimTempScale == esimtempLINEAR)
+ {
+ simtemp->temperatures[i] = simtemp->simtemp_low + (simtemp->simtemp_high-simtemp->simtemp_low)*temperature_lambdas[i];
+ }
+ else if (simtemp->eSimTempScale == esimtempGEOMETRIC) /* should give roughly equal acceptance for constant heat capacity . . . */
+ {
+ simtemp->temperatures[i] = simtemp->simtemp_low * std::pow(simtemp->simtemp_high/simtemp->simtemp_low, static_cast<real>((1.0*i)/(ntemps-1)));
+ }
+ else if (simtemp->eSimTempScale == esimtempEXPONENTIAL)
+ {
+ simtemp->temperatures[i] = simtemp->simtemp_low + (simtemp->simtemp_high-simtemp->simtemp_low)*(std::expm1(temperature_lambdas[i])/std::expm1(1.0));
+ }
+ else
+ {
+ char errorstr[128];
+ sprintf(errorstr, "eSimTempScale=%d not defined", simtemp->eSimTempScale);
+ gmx_fatal(FARGS, errorstr);
+ }
+ }
+}
+
+
+
+static void _low_check(gmx_bool b, const char *s, warninp_t wi)
+{
+ if (b)
+ {
+ warning_error(wi, s);
+ }
+}
+
+static void check_nst(const char *desc_nst, int nst,
+ const char *desc_p, int *p,
+ warninp_t wi)
+{
+ char buf[STRLEN];
+
+ if (*p > 0 && *p % nst != 0)
+ {
+ /* Round up to the next multiple of nst */
+ *p = ((*p)/nst + 1)*nst;
+ sprintf(buf, "%s should be a multiple of %s, changing %s to %d\n",
+ desc_p, desc_nst, desc_p, *p);
+ warning(wi, buf);
+ }
+}
+
+static gmx_bool ir_NVE(const t_inputrec *ir)
+{
+ return (EI_MD(ir->eI) && ir->etc == etcNO);
+}
+
+static int lcd(int n1, int n2)
+{
+ int d, i;
+
+ d = 1;
+ for (i = 2; (i <= n1 && i <= n2); i++)
+ {
+ if (n1 % i == 0 && n2 % i == 0)
+ {
+ d = i;
+ }
+ }
+
+ return d;
+}
+
+static void process_interaction_modifier(const t_inputrec *ir, int *eintmod)
+{
+ if (*eintmod == eintmodPOTSHIFT_VERLET)
+ {
+ if (ir->cutoff_scheme == ecutsVERLET)
+ {
+ *eintmod = eintmodPOTSHIFT;
+ }
+ else
+ {
+ *eintmod = eintmodNONE;
+ }
+ }
+}
+
+void check_ir(const char *mdparin, t_inputrec *ir, t_gromppopts *opts,
+ warninp_t wi)
+/* Check internal consistency.
+ * NOTE: index groups are not set here yet, don't check things
+ * like temperature coupling group options here, but in triple_check
+ */
+{
+ /* Strange macro: first one fills the err_buf, and then one can check
+ * the condition, which will print the message and increase the error
+ * counter.
+ */
+#define CHECK(b) _low_check(b, err_buf, wi)
+ char err_buf[256], warn_buf[STRLEN];
+ int i, j;
+ real dt_pcoupl;
+ t_lambda *fep = ir->fepvals;
+ t_expanded *expand = ir->expandedvals;
+
+ set_warning_line(wi, mdparin, -1);
+
+ if (ir->coulombtype == eelRF_NEC_UNSUPPORTED)
+ {
+ sprintf(warn_buf, "%s electrostatics is no longer supported",
+ eel_names[eelRF_NEC_UNSUPPORTED]);
+ warning_error(wi, warn_buf);
+ }
+
+ /* BASIC CUT-OFF STUFF */
+ if (ir->rcoulomb < 0)
+ {
+ warning_error(wi, "rcoulomb should be >= 0");
+ }
+ if (ir->rvdw < 0)
+ {
+ warning_error(wi, "rvdw should be >= 0");
+ }
+ if (ir->rlist < 0 &&
+ !(ir->cutoff_scheme == ecutsVERLET && ir->verletbuf_tol > 0))
+ {
+ warning_error(wi, "rlist should be >= 0");
+ }
+ sprintf(err_buf, "nstlist can not be smaller than 0. (If you were trying to use the heuristic neighbour-list update scheme for efficient buffering for improved energy conservation, please use the Verlet cut-off scheme instead.)");
+ CHECK(ir->nstlist < 0);
+
+ process_interaction_modifier(ir, &ir->coulomb_modifier);
+ process_interaction_modifier(ir, &ir->vdw_modifier);
+
+ if (ir->cutoff_scheme == ecutsGROUP)
+ {
+ warning_note(wi,
+ "The group cutoff scheme is deprecated since GROMACS 5.0 and will be removed in a future "
+ "release when all interaction forms are supported for the verlet scheme. The verlet "
+ "scheme already scales better, and it is compatible with GPUs and other accelerators.");
+
+ if (ir->rlist > 0 && ir->rlist < ir->rcoulomb)
+ {
+ gmx_fatal(FARGS, "rcoulomb must not be greater than rlist (twin-range schemes are not supported)");
+ }
+ if (ir->rlist > 0 && ir->rlist < ir->rvdw)
+ {
+ gmx_fatal(FARGS, "rvdw must not be greater than rlist (twin-range schemes are not supported)");
+ }
+
+ if (ir->rlist == 0 && ir->ePBC != epbcNONE)
+ {
+ warning_error(wi, "Can not have an infinite cut-off with PBC");
+ }
+ }
+
+ if (ir->cutoff_scheme == ecutsVERLET)
+ {
+ real rc_max;
+
+ /* Normal Verlet type neighbor-list, currently only limited feature support */
+ if (inputrec2nboundeddim(ir) < 3)
+ {
+ warning_error(wi, "With Verlet lists only full pbc or pbc=xy with walls is supported");
+ }
+ if (ir->rcoulomb != ir->rvdw)
+ {
+ warning_error(wi, "With Verlet lists rcoulomb!=rvdw is not supported");
+ }
+ if (ir->vdwtype == evdwSHIFT || ir->vdwtype == evdwSWITCH)
+ {
+ if (ir->vdw_modifier == eintmodNONE ||
+ ir->vdw_modifier == eintmodPOTSHIFT)
+ {
+ ir->vdw_modifier = (ir->vdwtype == evdwSHIFT ? eintmodFORCESWITCH : eintmodPOTSWITCH);
+
+ sprintf(warn_buf, "Replacing vdwtype=%s by the equivalent combination of vdwtype=%s and vdw_modifier=%s", evdw_names[ir->vdwtype], evdw_names[evdwCUT], eintmod_names[ir->vdw_modifier]);
+ warning_note(wi, warn_buf);
+
+ ir->vdwtype = evdwCUT;
+ }
+ else
+ {
+ sprintf(warn_buf, "Unsupported combination of vdwtype=%s and vdw_modifier=%s", evdw_names[ir->vdwtype], eintmod_names[ir->vdw_modifier]);
+ warning_error(wi, warn_buf);
+ }
+ }
+
+ if (!(ir->vdwtype == evdwCUT || ir->vdwtype == evdwPME))
+ {
+ warning_error(wi, "With Verlet lists only cut-off and PME LJ interactions are supported");
+ }
+ if (!(ir->coulombtype == eelCUT || EEL_RF(ir->coulombtype) ||
+ EEL_PME(ir->coulombtype) || ir->coulombtype == eelEWALD))
+ {
+ warning_error(wi, "With Verlet lists only cut-off, reaction-field, PME and Ewald electrostatics are supported");
+ }
+ if (!(ir->coulomb_modifier == eintmodNONE ||
+ ir->coulomb_modifier == eintmodPOTSHIFT))
+ {
+ sprintf(warn_buf, "coulomb_modifier=%s is not supported with the Verlet cut-off scheme", eintmod_names[ir->coulomb_modifier]);
+ warning_error(wi, warn_buf);
+ }
+
+ if (ir->implicit_solvent != eisNO)
+ {
+ warning_error(wi, "Implicit solvent is not (yet) supported with the with Verlet lists.");
+ }
+
+ if (ir->nstlist <= 0)
+ {
+ warning_error(wi, "With Verlet lists nstlist should be larger than 0");
+ }
+
+ if (ir->nstlist < 10)
+ {
+ warning_note(wi, "With Verlet lists the optimal nstlist is >= 10, with GPUs >= 20. Note that with the Verlet scheme, nstlist has no effect on the accuracy of your simulation.");
+ }
+
+ rc_max = std::max(ir->rvdw, ir->rcoulomb);
+
+ if (ir->verletbuf_tol <= 0)
+ {
+ if (ir->verletbuf_tol == 0)
+ {
+ warning_error(wi, "Can not have Verlet buffer tolerance of exactly 0");
+ }
+
+ if (ir->rlist < rc_max)
+ {
+ warning_error(wi, "With verlet lists rlist can not be smaller than rvdw or rcoulomb");
+ }
+
+ if (ir->rlist == rc_max && ir->nstlist > 1)
+ {
+ warning_note(wi, "rlist is equal to rvdw and/or rcoulomb: there is no explicit Verlet buffer. The cluster pair list does have a buffering effect, but choosing a larger rlist might be necessary for good energy conservation.");
+ }
+ }
+ else
+ {
+ if (ir->rlist > rc_max)
+ {
+ warning_note(wi, "You have set rlist larger than the interaction cut-off, but you also have verlet-buffer-tolerance > 0. Will set rlist using verlet-buffer-tolerance.");
+ }
+
+ if (ir->nstlist == 1)
+ {
+ /* No buffer required */
+ ir->rlist = rc_max;
+ }
+ else
+ {
+ if (EI_DYNAMICS(ir->eI))
+ {
+ if (inputrec2nboundeddim(ir) < 3)
+ {
+ warning_error(wi, "The box volume is required for calculating rlist from the energy drift with verlet-buffer-tolerance > 0. You are using at least one unbounded dimension, so no volume can be computed. Either use a finite box, or set rlist yourself together with verlet-buffer-tolerance = -1.");
+ }
+ /* Set rlist temporarily so we can continue processing */
+ ir->rlist = rc_max;
+ }
+ else
+ {
+ /* Set the buffer to 5% of the cut-off */
+ ir->rlist = (1.0 + verlet_buffer_ratio_nodynamics)*rc_max;
+ }
+ }
+ }
+ }
+
+ /* GENERAL INTEGRATOR STUFF */
+ if (!EI_MD(ir->eI))
+ {
+ if (ir->etc != etcNO)
+ {
+ if (EI_RANDOM(ir->eI))
+ {
+ sprintf(warn_buf, "Setting tcoupl from '%s' to 'no'. %s handles temperature coupling implicitly. See the documentation for more information on which parameters affect temperature for %s.", etcoupl_names[ir->etc], ei_names[ir->eI], ei_names[ir->eI]);
+ }
+ else
+ {
+ sprintf(warn_buf, "Setting tcoupl from '%s' to 'no'. Temperature coupling does not apply to %s.", etcoupl_names[ir->etc], ei_names[ir->eI]);
+ }
+ warning_note(wi, warn_buf);
+ }
+ ir->etc = etcNO;
+ }
+ if (ir->eI == eiVVAK)
+ {
+ sprintf(warn_buf, "Integrator method %s is implemented primarily for validation purposes; for molecular dynamics, you should probably be using %s or %s", ei_names[eiVVAK], ei_names[eiMD], ei_names[eiVV]);
+ warning_note(wi, warn_buf);
+ }
+ if (!EI_DYNAMICS(ir->eI))
+ {
+ if (ir->epc != epcNO)
+ {
+ sprintf(warn_buf, "Setting pcoupl from '%s' to 'no'. Pressure coupling does not apply to %s.", epcoupl_names[ir->epc], ei_names[ir->eI]);
+ warning_note(wi, warn_buf);
+ }
+ ir->epc = epcNO;
+ }
+ if (EI_DYNAMICS(ir->eI))
+ {
+ if (ir->nstcalcenergy < 0)
+ {
+ ir->nstcalcenergy = ir_optimal_nstcalcenergy(ir);
+ if (ir->nstenergy != 0 && ir->nstenergy < ir->nstcalcenergy)
+ {
+ /* nstcalcenergy larger than nstener does not make sense.
+ * We ideally want nstcalcenergy=nstener.
+ */
+ if (ir->nstlist > 0)
+ {
+ ir->nstcalcenergy = lcd(ir->nstenergy, ir->nstlist);
+ }
+ else
+ {
+ ir->nstcalcenergy = ir->nstenergy;
+ }
+ }
+ }
+ else if ( (ir->nstenergy > 0 && ir->nstcalcenergy > ir->nstenergy) ||
+ (ir->efep != efepNO && ir->fepvals->nstdhdl > 0 &&
+ (ir->nstcalcenergy > ir->fepvals->nstdhdl) ) )
+
+ {
+ const char *nsten = "nstenergy";
+ const char *nstdh = "nstdhdl";
+ const char *min_name = nsten;
+ int min_nst = ir->nstenergy;
+
+ /* find the smallest of ( nstenergy, nstdhdl ) */
+ if (ir->efep != efepNO && ir->fepvals->nstdhdl > 0 &&
+ (ir->nstenergy == 0 || ir->fepvals->nstdhdl < ir->nstenergy))
+ {
+ min_nst = ir->fepvals->nstdhdl;
+ min_name = nstdh;
+ }
+ /* If the user sets nstenergy small, we should respect that */
+ sprintf(warn_buf,
+ "Setting nstcalcenergy (%d) equal to %s (%d)",
+ ir->nstcalcenergy, min_name, min_nst);
+ warning_note(wi, warn_buf);
+ ir->nstcalcenergy = min_nst;
+ }
+
+ if (ir->epc != epcNO)
+ {
+ if (ir->nstpcouple < 0)
+ {
+ ir->nstpcouple = ir_optimal_nstpcouple(ir);
+ }
+ }
+
+ if (ir->nstcalcenergy > 0)
+ {
+ if (ir->efep != efepNO)
+ {
+ /* nstdhdl should be a multiple of nstcalcenergy */
+ check_nst("nstcalcenergy", ir->nstcalcenergy,
+ "nstdhdl", &ir->fepvals->nstdhdl, wi);
+ /* nstexpanded should be a multiple of nstcalcenergy */
+ check_nst("nstcalcenergy", ir->nstcalcenergy,
+ "nstexpanded", &ir->expandedvals->nstexpanded, wi);
+ }
+ /* for storing exact averages nstenergy should be
+ * a multiple of nstcalcenergy
+ */
+ check_nst("nstcalcenergy", ir->nstcalcenergy,
+ "nstenergy", &ir->nstenergy, wi);
+ }
+ }
+
+ if (ir->nsteps == 0 && !ir->bContinuation)
+ {
+ warning_note(wi, "For a correct single-point energy evaluation with nsteps = 0, use continuation = yes to avoid constraining the input coordinates.");
+ }
+
+ /* LD STUFF */
+ if ((EI_SD(ir->eI) || ir->eI == eiBD) &&
+ ir->bContinuation && ir->ld_seed != -1)
+ {
+ warning_note(wi, "You are doing a continuation with SD or BD, make sure that ld_seed is different from the previous run (using ld_seed=-1 will ensure this)");
+ }
+
+ /* TPI STUFF */
+ if (EI_TPI(ir->eI))
+ {
+ sprintf(err_buf, "TPI only works with pbc = %s", epbc_names[epbcXYZ]);
+ CHECK(ir->ePBC != epbcXYZ);
+ sprintf(err_buf, "TPI only works with ns = %s", ens_names[ensGRID]);
+ CHECK(ir->ns_type != ensGRID);
+ sprintf(err_buf, "with TPI nstlist should be larger than zero");
+ CHECK(ir->nstlist <= 0);
+ sprintf(err_buf, "TPI does not work with full electrostatics other than PME");
+ CHECK(EEL_FULL(ir->coulombtype) && !EEL_PME(ir->coulombtype));
+ sprintf(err_buf, "TPI does not work (yet) with the Verlet cut-off scheme");
+ CHECK(ir->cutoff_scheme == ecutsVERLET);
+ }
+
+ /* SHAKE / LINCS */
+ if ( (opts->nshake > 0) && (opts->bMorse) )
+ {
+ sprintf(warn_buf,
+ "Using morse bond-potentials while constraining bonds is useless");
+ warning(wi, warn_buf);
+ }
+
+ if ((EI_SD(ir->eI) || ir->eI == eiBD) &&
+ ir->bContinuation && ir->ld_seed != -1)
+ {
+ warning_note(wi, "You are doing a continuation with SD or BD, make sure that ld_seed is different from the previous run (using ld_seed=-1 will ensure this)");
+ }
+ /* verify simulated tempering options */
+
+ if (ir->bSimTemp)
+ {
+ gmx_bool bAllTempZero = TRUE;
+ for (i = 0; i < fep->n_lambda; i++)
+ {
+ sprintf(err_buf, "Entry %d for %s must be between 0 and 1, instead is %g", i, efpt_names[efptTEMPERATURE], fep->all_lambda[efptTEMPERATURE][i]);
+ CHECK((fep->all_lambda[efptTEMPERATURE][i] < 0) || (fep->all_lambda[efptTEMPERATURE][i] > 1));
+ if (fep->all_lambda[efptTEMPERATURE][i] > 0)
+ {
+ bAllTempZero = FALSE;
+ }
+ }
+ sprintf(err_buf, "if simulated tempering is on, temperature-lambdas may not be all zero");
+ CHECK(bAllTempZero == TRUE);
+
+ sprintf(err_buf, "Simulated tempering is currently only compatible with md-vv");
+ CHECK(ir->eI != eiVV);
+
+ /* check compatability of the temperature coupling with simulated tempering */
+
+ if (ir->etc == etcNOSEHOOVER)
+ {
+ sprintf(warn_buf, "Nose-Hoover based temperature control such as [%s] my not be entirelyconsistent with simulated tempering", etcoupl_names[ir->etc]);
+ warning_note(wi, warn_buf);
+ }
+
+ /* check that the temperatures make sense */
+
+ sprintf(err_buf, "Higher simulated tempering temperature (%g) must be >= than the simulated tempering lower temperature (%g)", ir->simtempvals->simtemp_high, ir->simtempvals->simtemp_low);
+ CHECK(ir->simtempvals->simtemp_high <= ir->simtempvals->simtemp_low);
+
+ sprintf(err_buf, "Higher simulated tempering temperature (%g) must be >= zero", ir->simtempvals->simtemp_high);
+ CHECK(ir->simtempvals->simtemp_high <= 0);
+
+ sprintf(err_buf, "Lower simulated tempering temperature (%g) must be >= zero", ir->simtempvals->simtemp_low);
+ CHECK(ir->simtempvals->simtemp_low <= 0);
+ }
+
+ /* verify free energy options */
+
+ if (ir->efep != efepNO)
+ {
+ fep = ir->fepvals;
+ sprintf(err_buf, "The soft-core power is %d and can only be 1 or 2",
+ fep->sc_power);
+ CHECK(fep->sc_alpha != 0 && fep->sc_power != 1 && fep->sc_power != 2);
+
+ sprintf(err_buf, "The soft-core sc-r-power is %d and can only be 6 or 48",
+ (int)fep->sc_r_power);
+ CHECK(fep->sc_alpha != 0 && fep->sc_r_power != 6.0 && fep->sc_r_power != 48.0);
+
+ sprintf(err_buf, "Can't use postive delta-lambda (%g) if initial state/lambda does not start at zero", fep->delta_lambda);
+ CHECK(fep->delta_lambda > 0 && ((fep->init_fep_state > 0) || (fep->init_lambda > 0)));
+
+ sprintf(err_buf, "Can't use postive delta-lambda (%g) with expanded ensemble simulations", fep->delta_lambda);
+ CHECK(fep->delta_lambda > 0 && (ir->efep == efepEXPANDED));
+
+ sprintf(err_buf, "Can only use expanded ensemble with md-vv (for now)");
+ CHECK(!(EI_VV(ir->eI)) && (ir->efep == efepEXPANDED));
+
+ sprintf(err_buf, "Free-energy not implemented for Ewald");
+ CHECK(ir->coulombtype == eelEWALD);
+
+ /* check validty of lambda inputs */
+ if (fep->n_lambda == 0)
+ {
+ /* Clear output in case of no states:*/
+ sprintf(err_buf, "init-lambda-state set to %d: no lambda states are defined.", fep->init_fep_state);
+ CHECK((fep->init_fep_state >= 0) && (fep->n_lambda == 0));
+ }
+ else
+ {
+ sprintf(err_buf, "initial thermodynamic state %d does not exist, only goes to %d", fep->init_fep_state, fep->n_lambda-1);
+ CHECK((fep->init_fep_state >= fep->n_lambda));
+ }
+
+ sprintf(err_buf, "Lambda state must be set, either with init-lambda-state or with init-lambda");
+ CHECK((fep->init_fep_state < 0) && (fep->init_lambda < 0));
+
+ sprintf(err_buf, "init-lambda=%g while init-lambda-state=%d. Lambda state must be set either with init-lambda-state or with init-lambda, but not both",
+ fep->init_lambda, fep->init_fep_state);
+ CHECK((fep->init_fep_state >= 0) && (fep->init_lambda >= 0));
+
+
+
+ if ((fep->init_lambda >= 0) && (fep->delta_lambda == 0))
+ {
+ int n_lambda_terms;
+ n_lambda_terms = 0;
+ for (i = 0; i < efptNR; i++)
+ {
+ if (fep->separate_dvdl[i])
+ {
+ n_lambda_terms++;
+ }
+ }
+ if (n_lambda_terms > 1)
+ {
+ sprintf(warn_buf, "If lambda vector states (fep-lambdas, coul-lambdas etc.) are set, don't use init-lambda to set lambda state (except for slow growth). Use init-lambda-state instead.");
+ warning(wi, warn_buf);
+ }
+
+ if (n_lambda_terms < 2 && fep->n_lambda > 0)
+ {
+ warning_note(wi,
+ "init-lambda is deprecated for setting lambda state (except for slow growth). Use init-lambda-state instead.");
+ }
+ }
+
+ for (j = 0; j < efptNR; j++)
+ {
+ for (i = 0; i < fep->n_lambda; i++)
+ {
+ sprintf(err_buf, "Entry %d for %s must be between 0 and 1, instead is %g", i, efpt_names[j], fep->all_lambda[j][i]);
+ CHECK((fep->all_lambda[j][i] < 0) || (fep->all_lambda[j][i] > 1));
+ }
+ }
+
+ if ((fep->sc_alpha > 0) && (!fep->bScCoul))
+ {
+ for (i = 0; i < fep->n_lambda; i++)
+ {
+ sprintf(err_buf, "For state %d, vdw-lambdas (%f) is changing with vdw softcore, while coul-lambdas (%f) is nonzero without coulomb softcore: this will lead to crashes, and is not supported.", i, fep->all_lambda[efptVDW][i],
+ fep->all_lambda[efptCOUL][i]);
+ CHECK((fep->sc_alpha > 0) &&
+ (((fep->all_lambda[efptCOUL][i] > 0.0) &&
+ (fep->all_lambda[efptCOUL][i] < 1.0)) &&
+ ((fep->all_lambda[efptVDW][i] > 0.0) &&
+ (fep->all_lambda[efptVDW][i] < 1.0))));
+ }
+ }
+
+ if ((fep->bScCoul) && (EEL_PME(ir->coulombtype)))
+ {
+ real sigma, lambda, r_sc;
+
+ sigma = 0.34;
+ /* Maximum estimate for A and B charges equal with lambda power 1 */
+ lambda = 0.5;
+ r_sc = std::pow(lambda*fep->sc_alpha*std::pow(sigma/ir->rcoulomb, fep->sc_r_power) + 1.0, 1.0/fep->sc_r_power);
+ sprintf(warn_buf, "With PME there is a minor soft core effect present at the cut-off, proportional to (LJsigma/rcoulomb)^%g. This could have a minor effect on energy conservation, but usually other effects dominate. With a common sigma value of %g nm the fraction of the particle-particle potential at the cut-off at lambda=%g is around %.1e, while ewald-rtol is %.1e.",
+ fep->sc_r_power,
+ sigma, lambda, r_sc - 1.0, ir->ewald_rtol);
+ warning_note(wi, warn_buf);
+ }
+
+ /* Free Energy Checks -- In an ideal world, slow growth and FEP would
+ be treated differently, but that's the next step */
+
+ for (i = 0; i < efptNR; i++)
+ {
+ for (j = 0; j < fep->n_lambda; j++)
+ {
+ sprintf(err_buf, "%s[%d] must be between 0 and 1", efpt_names[i], j);
+ CHECK((fep->all_lambda[i][j] < 0) || (fep->all_lambda[i][j] > 1));
+ }
+ }
+ }
+
+ if ((ir->bSimTemp) || (ir->efep == efepEXPANDED))
+ {
+ fep = ir->fepvals;
+
+ /* checking equilibration of weights inputs for validity */
+
+ sprintf(err_buf, "weight-equil-number-all-lambda (%d) is ignored if lmc-weights-equil is not equal to %s",
+ expand->equil_n_at_lam, elmceq_names[elmceqNUMATLAM]);
+ CHECK((expand->equil_n_at_lam > 0) && (expand->elmceq != elmceqNUMATLAM));
+
+ sprintf(err_buf, "weight-equil-number-samples (%d) is ignored if lmc-weights-equil is not equal to %s",
+ expand->equil_samples, elmceq_names[elmceqSAMPLES]);
+ CHECK((expand->equil_samples > 0) && (expand->elmceq != elmceqSAMPLES));
+
+ sprintf(err_buf, "weight-equil-number-steps (%d) is ignored if lmc-weights-equil is not equal to %s",
+ expand->equil_steps, elmceq_names[elmceqSTEPS]);
+ CHECK((expand->equil_steps > 0) && (expand->elmceq != elmceqSTEPS));
+
+ sprintf(err_buf, "weight-equil-wl-delta (%d) is ignored if lmc-weights-equil is not equal to %s",
+ expand->equil_samples, elmceq_names[elmceqWLDELTA]);
+ CHECK((expand->equil_wl_delta > 0) && (expand->elmceq != elmceqWLDELTA));
+
+ sprintf(err_buf, "weight-equil-count-ratio (%f) is ignored if lmc-weights-equil is not equal to %s",
+ expand->equil_ratio, elmceq_names[elmceqRATIO]);
+ CHECK((expand->equil_ratio > 0) && (expand->elmceq != elmceqRATIO));
+
+ sprintf(err_buf, "weight-equil-number-all-lambda (%d) must be a positive integer if lmc-weights-equil=%s",
+ expand->equil_n_at_lam, elmceq_names[elmceqNUMATLAM]);
+ CHECK((expand->equil_n_at_lam <= 0) && (expand->elmceq == elmceqNUMATLAM));
+
+ sprintf(err_buf, "weight-equil-number-samples (%d) must be a positive integer if lmc-weights-equil=%s",
+ expand->equil_samples, elmceq_names[elmceqSAMPLES]);
+ CHECK((expand->equil_samples <= 0) && (expand->elmceq == elmceqSAMPLES));
+
+ sprintf(err_buf, "weight-equil-number-steps (%d) must be a positive integer if lmc-weights-equil=%s",
+ expand->equil_steps, elmceq_names[elmceqSTEPS]);
+ CHECK((expand->equil_steps <= 0) && (expand->elmceq == elmceqSTEPS));
+
+ sprintf(err_buf, "weight-equil-wl-delta (%f) must be > 0 if lmc-weights-equil=%s",
+ expand->equil_wl_delta, elmceq_names[elmceqWLDELTA]);
+ CHECK((expand->equil_wl_delta <= 0) && (expand->elmceq == elmceqWLDELTA));
+
+ sprintf(err_buf, "weight-equil-count-ratio (%f) must be > 0 if lmc-weights-equil=%s",
+ expand->equil_ratio, elmceq_names[elmceqRATIO]);
+ CHECK((expand->equil_ratio <= 0) && (expand->elmceq == elmceqRATIO));
+
+ sprintf(err_buf, "lmc-weights-equil=%s only possible when lmc-stats = %s or lmc-stats %s",
+ elmceq_names[elmceqWLDELTA], elamstats_names[elamstatsWL], elamstats_names[elamstatsWWL]);
+ CHECK((expand->elmceq == elmceqWLDELTA) && (!EWL(expand->elamstats)));
+
+ sprintf(err_buf, "lmc-repeats (%d) must be greater than 0", expand->lmc_repeats);
+ CHECK((expand->lmc_repeats <= 0));
+ sprintf(err_buf, "minimum-var-min (%d) must be greater than 0", expand->minvarmin);
+ CHECK((expand->minvarmin <= 0));
+ sprintf(err_buf, "weight-c-range (%d) must be greater or equal to 0", expand->c_range);
+ CHECK((expand->c_range < 0));
+ sprintf(err_buf, "init-lambda-state (%d) must be zero if lmc-forced-nstart (%d)> 0 and lmc-move != 'no'",
+ fep->init_fep_state, expand->lmc_forced_nstart);
+ CHECK((fep->init_fep_state != 0) && (expand->lmc_forced_nstart > 0) && (expand->elmcmove != elmcmoveNO));
+ sprintf(err_buf, "lmc-forced-nstart (%d) must not be negative", expand->lmc_forced_nstart);
+ CHECK((expand->lmc_forced_nstart < 0));
+ sprintf(err_buf, "init-lambda-state (%d) must be in the interval [0,number of lambdas)", fep->init_fep_state);
+ CHECK((fep->init_fep_state < 0) || (fep->init_fep_state >= fep->n_lambda));
+
+ sprintf(err_buf, "init-wl-delta (%f) must be greater than or equal to 0", expand->init_wl_delta);
+ CHECK((expand->init_wl_delta < 0));
+ sprintf(err_buf, "wl-ratio (%f) must be between 0 and 1", expand->wl_ratio);
+ CHECK((expand->wl_ratio <= 0) || (expand->wl_ratio >= 1));
+ sprintf(err_buf, "wl-scale (%f) must be between 0 and 1", expand->wl_scale);
+ CHECK((expand->wl_scale <= 0) || (expand->wl_scale >= 1));
+
+ /* if there is no temperature control, we need to specify an MC temperature */
+ sprintf(err_buf, "If there is no temperature control, and lmc-mcmove!= 'no',mc_temperature must be set to a positive number");
+ if (expand->nstTij > 0)
+ {
+ sprintf(err_buf, "nstlog must be non-zero");
+ CHECK(ir->nstlog != 0);
+ sprintf(err_buf, "nst-transition-matrix (%d) must be an integer multiple of nstlog (%d)",
+ expand->nstTij, ir->nstlog);
+ CHECK((expand->nstTij % ir->nstlog) != 0);
+ }
+ }
+
+ /* PBC/WALLS */
+ sprintf(err_buf, "walls only work with pbc=%s", epbc_names[epbcXY]);
+ CHECK(ir->nwall && ir->ePBC != epbcXY);
+
+ /* VACUUM STUFF */
+ if (ir->ePBC != epbcXYZ && ir->nwall != 2)
+ {
+ if (ir->ePBC == epbcNONE)
+ {
+ if (ir->epc != epcNO)
+ {
+ warning(wi, "Turning off pressure coupling for vacuum system");
+ ir->epc = epcNO;
+ }
+ }
+ else
+ {
+ sprintf(err_buf, "Can not have pressure coupling with pbc=%s",
+ epbc_names[ir->ePBC]);
+ CHECK(ir->epc != epcNO);
+ }
+ sprintf(err_buf, "Can not have Ewald with pbc=%s", epbc_names[ir->ePBC]);
+ CHECK(EEL_FULL(ir->coulombtype));
+
+ sprintf(err_buf, "Can not have dispersion correction with pbc=%s",
+ epbc_names[ir->ePBC]);
+ CHECK(ir->eDispCorr != edispcNO);
+ }
+
+ if (ir->rlist == 0.0)
+ {
+ sprintf(err_buf, "can only have neighborlist cut-off zero (=infinite)\n"
+ "with coulombtype = %s or coulombtype = %s\n"
+ "without periodic boundary conditions (pbc = %s) and\n"
+ "rcoulomb and rvdw set to zero",
+ eel_names[eelCUT], eel_names[eelUSER], epbc_names[epbcNONE]);
+ CHECK(((ir->coulombtype != eelCUT) && (ir->coulombtype != eelUSER)) ||
+ (ir->ePBC != epbcNONE) ||
+ (ir->rcoulomb != 0.0) || (ir->rvdw != 0.0));
+
+ if (ir->nstlist > 0)
+ {
+ warning_note(wi, "Simulating without cut-offs can be (slightly) faster with nstlist=0, nstype=simple and only one MPI rank");
+ }
+ }
+
+ /* COMM STUFF */
+ if (ir->nstcomm == 0)
+ {
+ ir->comm_mode = ecmNO;
+ }
+ if (ir->comm_mode != ecmNO)
+ {
+ if (ir->nstcomm < 0)
+ {
+ warning(wi, "If you want to remove the rotation around the center of mass, you should set comm_mode = Angular instead of setting nstcomm < 0. nstcomm is modified to its absolute value");
+ ir->nstcomm = abs(ir->nstcomm);
+ }
+
+ if (ir->nstcalcenergy > 0 && ir->nstcomm < ir->nstcalcenergy)
+ {
+ warning_note(wi, "nstcomm < nstcalcenergy defeats the purpose of nstcalcenergy, setting nstcomm to nstcalcenergy");
+ ir->nstcomm = ir->nstcalcenergy;
+ }
+
+ if (ir->comm_mode == ecmANGULAR)
+ {
+ sprintf(err_buf, "Can not remove the rotation around the center of mass with periodic molecules");
+ CHECK(ir->bPeriodicMols);
+ if (ir->ePBC != epbcNONE)
+ {
+ warning(wi, "Removing the rotation around the center of mass in a periodic system, this can lead to artifacts. Only use this on a single (cluster of) molecules. This cluster should not cross periodic boundaries.");
+ }
+ }
+ }
+
+ if (EI_STATE_VELOCITY(ir->eI) && ir->ePBC == epbcNONE && ir->comm_mode != ecmANGULAR)
+ {
+ warning_note(wi, "Tumbling and or flying ice-cubes: We are not removing rotation around center of mass in a non-periodic system. You should probably set comm_mode = ANGULAR.");
+ }
+
+ /* TEMPERATURE COUPLING */
+ if (ir->etc == etcYES)
+ {
+ ir->etc = etcBERENDSEN;
+ warning_note(wi, "Old option for temperature coupling given: "
+ "changing \"yes\" to \"Berendsen\"\n");
+ }
+
+ if ((ir->etc == etcNOSEHOOVER) || (ir->epc == epcMTTK))
+ {
+ if (ir->opts.nhchainlength < 1)
+ {
+ sprintf(warn_buf, "number of Nose-Hoover chains (currently %d) cannot be less than 1,reset to 1\n", ir->opts.nhchainlength);
+ ir->opts.nhchainlength = 1;
+ warning(wi, warn_buf);
+ }
+
+ if (ir->etc == etcNOSEHOOVER && !EI_VV(ir->eI) && ir->opts.nhchainlength > 1)
+ {
+ warning_note(wi, "leapfrog does not yet support Nose-Hoover chains, nhchainlength reset to 1");
+ ir->opts.nhchainlength = 1;
+ }
+ }
+ else
+ {
+ ir->opts.nhchainlength = 0;
+ }
+
+ if (ir->eI == eiVVAK)
+ {
+ sprintf(err_buf, "%s implemented primarily for validation, and requires nsttcouple = 1 and nstpcouple = 1.",
+ ei_names[eiVVAK]);
+ CHECK((ir->nsttcouple != 1) || (ir->nstpcouple != 1));
+ }
+
+ if (ETC_ANDERSEN(ir->etc))
+ {
+ sprintf(err_buf, "%s temperature control not supported for integrator %s.", etcoupl_names[ir->etc], ei_names[ir->eI]);
+ CHECK(!(EI_VV(ir->eI)));
+
+ if (ir->nstcomm > 0 && (ir->etc == etcANDERSEN))
+ {
+ sprintf(warn_buf, "Center of mass removal not necessary for %s. All velocities of coupled groups are rerandomized periodically, so flying ice cube errors will not occur.", etcoupl_names[ir->etc]);
+ warning_note(wi, warn_buf);
+ }
+
+ sprintf(err_buf, "nstcomm must be 1, not %d for %s, as velocities of atoms in coupled groups are randomized every time step", ir->nstcomm, etcoupl_names[ir->etc]);
+ CHECK(ir->nstcomm > 1 && (ir->etc == etcANDERSEN));
+ }
+
+ if (ir->etc == etcBERENDSEN)
+ {
+ sprintf(warn_buf, "The %s thermostat does not generate the correct kinetic energy distribution. You might want to consider using the %s thermostat.",
+ ETCOUPLTYPE(ir->etc), ETCOUPLTYPE(etcVRESCALE));
+ warning_note(wi, warn_buf);
+ }
+
+ if ((ir->etc == etcNOSEHOOVER || ETC_ANDERSEN(ir->etc))
+ && ir->epc == epcBERENDSEN)
+ {
+ sprintf(warn_buf, "Using Berendsen pressure coupling invalidates the "
+ "true ensemble for the thermostat");
+ warning(wi, warn_buf);
+ }
+
+ /* PRESSURE COUPLING */
+ if (ir->epc == epcISOTROPIC)
+ {
+ ir->epc = epcBERENDSEN;
+ warning_note(wi, "Old option for pressure coupling given: "
+ "changing \"Isotropic\" to \"Berendsen\"\n");
+ }
+
+ if (ir->epc != epcNO)
+ {
+ dt_pcoupl = ir->nstpcouple*ir->delta_t;
+
+ sprintf(err_buf, "tau-p must be > 0 instead of %g\n", ir->tau_p);
+ CHECK(ir->tau_p <= 0);
+
+ if (ir->tau_p/dt_pcoupl < pcouple_min_integration_steps(ir->epc) - 10*GMX_REAL_EPS)
+ {
+ sprintf(warn_buf, "For proper integration of the %s barostat, tau-p (%g) should be at least %d times larger than nstpcouple*dt (%g)",
+ EPCOUPLTYPE(ir->epc), ir->tau_p, pcouple_min_integration_steps(ir->epc), dt_pcoupl);
+ warning(wi, warn_buf);
+ }
+
+ sprintf(err_buf, "compressibility must be > 0 when using pressure"
+ " coupling %s\n", EPCOUPLTYPE(ir->epc));
+ CHECK(ir->compress[XX][XX] < 0 || ir->compress[YY][YY] < 0 ||
+ ir->compress[ZZ][ZZ] < 0 ||
+ (trace(ir->compress) == 0 && ir->compress[YY][XX] <= 0 &&
+ ir->compress[ZZ][XX] <= 0 && ir->compress[ZZ][YY] <= 0));
+
+ if (epcPARRINELLORAHMAN == ir->epc && opts->bGenVel)
+ {
+ sprintf(warn_buf,
+ "You are generating velocities so I am assuming you "
+ "are equilibrating a system. You are using "
+ "%s pressure coupling, but this can be "
+ "unstable for equilibration. If your system crashes, try "
+ "equilibrating first with Berendsen pressure coupling. If "
+ "you are not equilibrating the system, you can probably "
+ "ignore this warning.",
+ epcoupl_names[ir->epc]);
+ warning(wi, warn_buf);
+ }
+ }
+
+ if (EI_VV(ir->eI))
+ {
+ if (ir->epc > epcNO)
+ {
+ if ((ir->epc != epcBERENDSEN) && (ir->epc != epcMTTK))
+ {
+ warning_error(wi, "for md-vv and md-vv-avek, can only use Berendsen and Martyna-Tuckerman-Tobias-Klein (MTTK) equations for pressure control; MTTK is equivalent to Parrinello-Rahman.");
+ }
+ }
+ }
+ else
+ {
+ if (ir->epc == epcMTTK)
+ {
+ warning_error(wi, "MTTK pressure coupling requires a Velocity-verlet integrator");
+ }
+ }
+
+ /* ELECTROSTATICS */
+ /* More checks are in triple check (grompp.c) */
+
+ if (ir->coulombtype == eelSWITCH)
+ {
+ sprintf(warn_buf, "coulombtype = %s is only for testing purposes and can lead to serious "
+ "artifacts, advice: use coulombtype = %s",
+ eel_names[ir->coulombtype],
+ eel_names[eelRF_ZERO]);
+ warning(wi, warn_buf);
+ }
+
+ if (ir->epsilon_r != 1 && ir->implicit_solvent == eisGBSA)
+ {
+ sprintf(warn_buf, "epsilon-r = %g with GB implicit solvent, will use this value for inner dielectric", ir->epsilon_r);
+ warning_note(wi, warn_buf);
+ }
+
+ if (EEL_RF(ir->coulombtype) && ir->epsilon_rf == 1 && ir->epsilon_r != 1)
+ {
+ sprintf(warn_buf, "epsilon-r = %g and epsilon-rf = 1 with reaction field, proceeding assuming old format and exchanging epsilon-r and epsilon-rf", ir->epsilon_r);
+ warning(wi, warn_buf);
+ ir->epsilon_rf = ir->epsilon_r;
+ ir->epsilon_r = 1.0;
+ }
+
+ if (ir->epsilon_r == 0)
+ {
+ sprintf(err_buf,
+ "It is pointless to use long-range or Generalized Born electrostatics with infinite relative permittivity."
+ "Since you are effectively turning of electrostatics, a plain cutoff will be much faster.");
+ CHECK(EEL_FULL(ir->coulombtype) || ir->implicit_solvent == eisGBSA);
+ }
+
+ if (getenv("GMX_DO_GALACTIC_DYNAMICS") == NULL)
+ {
+ sprintf(err_buf, "epsilon-r must be >= 0 instead of %g\n", ir->epsilon_r);
+ CHECK(ir->epsilon_r < 0);
+ }
+
+ if (EEL_RF(ir->coulombtype))
+ {
+ /* reaction field (at the cut-off) */
+
+ if (ir->coulombtype == eelRF_ZERO && ir->epsilon_rf != 0)
+ {
+ sprintf(warn_buf, "With coulombtype = %s, epsilon-rf must be 0, assuming you meant epsilon_rf=0",
+ eel_names[ir->coulombtype]);
+ warning(wi, warn_buf);
+ ir->epsilon_rf = 0.0;
+ }
+
+ sprintf(err_buf, "epsilon-rf must be >= epsilon-r");
+ CHECK((ir->epsilon_rf < ir->epsilon_r && ir->epsilon_rf != 0) ||
+ (ir->epsilon_r == 0));
+ if (ir->epsilon_rf == ir->epsilon_r)
+ {
+ sprintf(warn_buf, "Using epsilon-rf = epsilon-r with %s does not make sense",
+ eel_names[ir->coulombtype]);
+ warning(wi, warn_buf);
+ }
+ }
+ /* Allow rlist>rcoulomb for tabulated long range stuff. This just
+ * means the interaction is zero outside rcoulomb, but it helps to
+ * provide accurate energy conservation.
+ */
+ if (ir_coulomb_might_be_zero_at_cutoff(ir))
+ {
+ if (ir_coulomb_switched(ir))
+ {
+ sprintf(err_buf,
+ "With coulombtype = %s rcoulomb_switch must be < rcoulomb. Or, better: Use the potential modifier options!",
+ eel_names[ir->coulombtype]);
+ CHECK(ir->rcoulomb_switch >= ir->rcoulomb);
+ }
+ }
+ else if (ir->coulombtype == eelCUT || EEL_RF(ir->coulombtype))
+ {
+ if (ir->cutoff_scheme == ecutsGROUP && ir->coulomb_modifier == eintmodNONE)
+ {
+ sprintf(err_buf, "With coulombtype = %s, rcoulomb should be >= rlist unless you use a potential modifier",
+ eel_names[ir->coulombtype]);
+ CHECK(ir->rlist > ir->rcoulomb);
+ }
+ }
+
+ if (ir->coulombtype == eelSWITCH || ir->coulombtype == eelSHIFT)
+ {
+ sprintf(err_buf,
+ "Explicit switch/shift coulomb interactions cannot be used in combination with a secondary coulomb-modifier.");
+ CHECK( ir->coulomb_modifier != eintmodNONE);
+ }
+ if (ir->vdwtype == evdwSWITCH || ir->vdwtype == evdwSHIFT)
+ {
+ sprintf(err_buf,
+ "Explicit switch/shift vdw interactions cannot be used in combination with a secondary vdw-modifier.");
+ CHECK( ir->vdw_modifier != eintmodNONE);
+ }
+
+ if (ir->coulombtype == eelSWITCH || ir->coulombtype == eelSHIFT ||
+ ir->vdwtype == evdwSWITCH || ir->vdwtype == evdwSHIFT)
+ {
+ sprintf(warn_buf,
+ "The switch/shift interaction settings are just for compatibility; you will get better "
+ "performance from applying potential modifiers to your interactions!\n");
+ warning_note(wi, warn_buf);
+ }
+
+ if (ir->coulombtype == eelPMESWITCH || ir->coulomb_modifier == eintmodPOTSWITCH)
+ {
+ if (ir->rcoulomb_switch/ir->rcoulomb < 0.9499)
+ {
+ real percentage = 100*(ir->rcoulomb-ir->rcoulomb_switch)/ir->rcoulomb;
+ sprintf(warn_buf, "The switching range should be 5%% or less (currently %.2f%% using a switching range of %4f-%4f) for accurate electrostatic energies, energy conservation will be good regardless, since ewald_rtol = %g.",
+ percentage, ir->rcoulomb_switch, ir->rcoulomb, ir->ewald_rtol);
+ warning(wi, warn_buf);
+ }
+ }
+
+ if (ir->vdwtype == evdwSWITCH || ir->vdw_modifier == eintmodPOTSWITCH)
+ {
+ if (ir->rvdw_switch == 0)
+ {
+ sprintf(warn_buf, "rvdw-switch is equal 0 even though you are using a switched Lennard-Jones potential. This suggests it was not set in the mdp, which can lead to large energy errors. In GROMACS, 0.05 to 0.1 nm is often a reasonable vdw switching range.");
+ warning(wi, warn_buf);
+ }
+ }
+
+ if (EEL_FULL(ir->coulombtype))
+ {
+ if (ir->coulombtype == eelPMESWITCH || ir->coulombtype == eelPMEUSER ||
+ ir->coulombtype == eelPMEUSERSWITCH)
+ {
+ sprintf(err_buf, "With coulombtype = %s, rcoulomb must be <= rlist",
+ eel_names[ir->coulombtype]);
+ CHECK(ir->rcoulomb > ir->rlist);
+ }
+ else if (ir->cutoff_scheme == ecutsGROUP && ir->coulomb_modifier == eintmodNONE)
+ {
+ if (ir->coulombtype == eelPME || ir->coulombtype == eelP3M_AD)
+ {
+ sprintf(err_buf,
+ "With coulombtype = %s (without modifier), rcoulomb must be equal to rlist.\n"
+ "For optimal energy conservation,consider using\n"
+ "a potential modifier.", eel_names[ir->coulombtype]);
+ CHECK(ir->rcoulomb != ir->rlist);
+ }
+ }
+ }
+
+ if (EEL_PME(ir->coulombtype) || EVDW_PME(ir->vdwtype))
+ {
+ if (ir->pme_order < 3)
+ {
+ warning_error(wi, "pme-order can not be smaller than 3");
+ }
+ }
+
+ if (ir->nwall == 2 && EEL_FULL(ir->coulombtype))
+ {
+ if (ir->ewald_geometry == eewg3D)
+ {
+ sprintf(warn_buf, "With pbc=%s you should use ewald-geometry=%s",
+ epbc_names[ir->ePBC], eewg_names[eewg3DC]);
+ warning(wi, warn_buf);
+ }
+ /* This check avoids extra pbc coding for exclusion corrections */
+ sprintf(err_buf, "wall-ewald-zfac should be >= 2");
+ CHECK(ir->wall_ewald_zfac < 2);
+ }
+ if ((ir->ewald_geometry == eewg3DC) && (ir->ePBC != epbcXY) &&
+ EEL_FULL(ir->coulombtype))
+ {
+ sprintf(warn_buf, "With %s and ewald_geometry = %s you should use pbc = %s",
+ eel_names[ir->coulombtype], eewg_names[eewg3DC], epbc_names[epbcXY]);
+ warning(wi, warn_buf);
+ }
+ if ((ir->epsilon_surface != 0) && EEL_FULL(ir->coulombtype))
+ {
+ if (ir->cutoff_scheme == ecutsVERLET)
+ {
+ sprintf(warn_buf, "Since molecules/charge groups are broken using the Verlet scheme, you can not use a dipole correction to the %s electrostatics.",
+ eel_names[ir->coulombtype]);
+ warning(wi, warn_buf);
+ }
+ else
+ {
+ sprintf(warn_buf, "Dipole corrections to %s electrostatics only work if all charge groups that can cross PBC boundaries are dipoles. If this is not the case set epsilon_surface to 0",
+ eel_names[ir->coulombtype]);
+ warning_note(wi, warn_buf);
+ }
+ }
+
+ if (ir_vdw_switched(ir))
+ {
+ sprintf(err_buf, "With switched vdw forces or potentials, rvdw-switch must be < rvdw");
+ CHECK(ir->rvdw_switch >= ir->rvdw);
+
+ if (ir->rvdw_switch < 0.5*ir->rvdw)
+ {
+ sprintf(warn_buf, "You are applying a switch function to vdw forces or potentials from %g to %g nm, which is more than half the interaction range, whereas switch functions are intended to act only close to the cut-off.",
+ ir->rvdw_switch, ir->rvdw);
+ warning_note(wi, warn_buf);
+ }
+ }
+ else if (ir->vdwtype == evdwCUT || ir->vdwtype == evdwPME)
+ {
+ if (ir->cutoff_scheme == ecutsGROUP && ir->vdw_modifier == eintmodNONE)
+ {
+ sprintf(err_buf, "With vdwtype = %s, rvdw must be >= rlist unless you use a potential modifier", evdw_names[ir->vdwtype]);
+ CHECK(ir->rlist > ir->rvdw);
+ }
+ }
+
+ if (ir->vdwtype == evdwPME)
+ {
+ if (!(ir->vdw_modifier == eintmodNONE || ir->vdw_modifier == eintmodPOTSHIFT))
+ {
+ sprintf(err_buf, "With vdwtype = %s, the only supported modifiers are %s and %s",
+ evdw_names[ir->vdwtype],
+ eintmod_names[eintmodPOTSHIFT],
+ eintmod_names[eintmodNONE]);
+ }
+ }
+
+ if (ir->cutoff_scheme == ecutsGROUP)
+ {
+ if (((ir->coulomb_modifier != eintmodNONE && ir->rcoulomb == ir->rlist) ||
+ (ir->vdw_modifier != eintmodNONE && ir->rvdw == ir->rlist)))
+ {
+ warning_note(wi, "With exact cut-offs, rlist should be "
+ "larger than rcoulomb and rvdw, so that there "
+ "is a buffer region for particle motion "
+ "between neighborsearch steps");
+ }
+
+ if (ir_coulomb_is_zero_at_cutoff(ir) && ir->rlist <= ir->rcoulomb)
+ {
+ sprintf(warn_buf, "For energy conservation with switch/shift potentials, rlist should be 0.1 to 0.3 nm larger than rcoulomb.");
+ warning_note(wi, warn_buf);
+ }
+ if (ir_vdw_switched(ir) && (ir->rlist <= ir->rvdw))
+ {
+ sprintf(warn_buf, "For energy conservation with switch/shift potentials, rlist should be 0.1 to 0.3 nm larger than rvdw.");
+ warning_note(wi, warn_buf);
+ }
+ }
+
+ if (ir->vdwtype == evdwUSER && ir->eDispCorr != edispcNO)
+ {
+ warning_note(wi, "You have selected user tables with dispersion correction, the dispersion will be corrected to -C6/r^6 beyond rvdw_switch (the tabulated interaction between rvdw_switch and rvdw will not be double counted). Make sure that you really want dispersion correction to -C6/r^6.");
+ }
+
+ if (ir->eI == eiLBFGS && (ir->coulombtype == eelCUT || ir->vdwtype == evdwCUT)
+ && ir->rvdw != 0)
+ {
+ warning(wi, "For efficient BFGS minimization, use switch/shift/pme instead of cut-off.");
+ }
+
+ if (ir->eI == eiLBFGS && ir->nbfgscorr <= 0)
+ {
+ warning(wi, "Using L-BFGS with nbfgscorr<=0 just gets you steepest descent.");
+ }
+
+ /* ENERGY CONSERVATION */
+ if (ir_NVE(ir) && ir->cutoff_scheme == ecutsGROUP)
+ {
+ if (!ir_vdw_might_be_zero_at_cutoff(ir) && ir->rvdw > 0 && ir->vdw_modifier == eintmodNONE)
+ {
+ sprintf(warn_buf, "You are using a cut-off for VdW interactions with NVE, for good energy conservation use vdwtype = %s (possibly with DispCorr)",
+ evdw_names[evdwSHIFT]);
+ warning_note(wi, warn_buf);
+ }
+ if (!ir_coulomb_might_be_zero_at_cutoff(ir) && ir->rcoulomb > 0)
+ {
+ sprintf(warn_buf, "You are using a cut-off for electrostatics with NVE, for good energy conservation use coulombtype = %s or %s",
+ eel_names[eelPMESWITCH], eel_names[eelRF_ZERO]);
+ warning_note(wi, warn_buf);
+ }
+ }
+
+ /* IMPLICIT SOLVENT */
+ if (ir->coulombtype == eelGB_NOTUSED)
+ {
+ sprintf(warn_buf, "Invalid option %s for coulombtype",
+ eel_names[ir->coulombtype]);
+ warning_error(wi, warn_buf);
+ }
+
+ if (ir->sa_algorithm == esaSTILL)
+ {
+ sprintf(err_buf, "Still SA algorithm not available yet, use %s or %s instead\n", esa_names[esaAPPROX], esa_names[esaNO]);
+ CHECK(ir->sa_algorithm == esaSTILL);
+ }
+
+ if (ir->implicit_solvent == eisGBSA)
+ {
+ sprintf(err_buf, "With GBSA implicit solvent, rgbradii must be equal to rlist.");
+ CHECK(ir->rgbradii != ir->rlist);
+
+ if (ir->coulombtype != eelCUT)
+ {
+ sprintf(err_buf, "With GBSA, coulombtype must be equal to %s\n", eel_names[eelCUT]);
+ CHECK(ir->coulombtype != eelCUT);
+ }
+ if (ir->vdwtype != evdwCUT)
+ {
+ sprintf(err_buf, "With GBSA, vdw-type must be equal to %s\n", evdw_names[evdwCUT]);
+ CHECK(ir->vdwtype != evdwCUT);
+ }
+ if (ir->nstgbradii < 1)
+ {
+ sprintf(warn_buf, "Using GBSA with nstgbradii<1, setting nstgbradii=1");
+ warning_note(wi, warn_buf);
+ ir->nstgbradii = 1;
+ }
+ if (ir->sa_algorithm == esaNO)
+ {
+ sprintf(warn_buf, "No SA (non-polar) calculation requested together with GB. Are you sure this is what you want?\n");
+ warning_note(wi, warn_buf);
+ }
+ if (ir->sa_surface_tension < 0 && ir->sa_algorithm != esaNO)
+ {
+ sprintf(warn_buf, "Value of sa_surface_tension is < 0. Changing it to 2.05016 or 2.25936 kJ/nm^2/mol for Still and HCT/OBC respectively\n");
+ warning_note(wi, warn_buf);
+
+ if (ir->gb_algorithm == egbSTILL)
+ {
+ ir->sa_surface_tension = 0.0049 * CAL2JOULE * 100;
+ }
+ else
+ {
+ ir->sa_surface_tension = 0.0054 * CAL2JOULE * 100;
+ }
+ }
+ if (ir->sa_surface_tension == 0 && ir->sa_algorithm != esaNO)
+ {
+ sprintf(err_buf, "Surface tension set to 0 while SA-calculation requested\n");
+ CHECK(ir->sa_surface_tension == 0 && ir->sa_algorithm != esaNO);
+ }
+
+ }
+
+ if (ir->bAdress)
+ {
+ gmx_fatal(FARGS, "AdResS simulations are no longer supported");
+ }
+}
+
+/* count the number of text elemets separated by whitespace in a string.
+ str = the input string
+ maxptr = the maximum number of allowed elements
+ ptr = the output array of pointers to the first character of each element
+ returns: the number of elements. */
+int str_nelem(const char *str, int maxptr, char *ptr[])
+{
+ int np = 0;
+ char *copy0, *copy;
+
+ copy0 = gmx_strdup(str);
+ copy = copy0;
+ ltrim(copy);
+ while (*copy != '\0')
+ {
+ if (np >= maxptr)
+ {
+ gmx_fatal(FARGS, "Too many groups on line: '%s' (max is %d)",
+ str, maxptr);
+ }
+ if (ptr)
+ {
+ ptr[np] = copy;
+ }
+ np++;
+ while ((*copy != '\0') && !isspace(*copy))
+ {
+ copy++;
+ }
+ if (*copy != '\0')
+ {
+ *copy = '\0';
+ copy++;
+ }
+ ltrim(copy);
+ }
+ if (ptr == NULL)
+ {
+ sfree(copy0);
+ }
+
+ return np;
+}
+
+/* interpret a number of doubles from a string and put them in an array,
+ after allocating space for them.
+ str = the input string
+ n = the (pre-allocated) number of doubles read
+ r = the output array of doubles. */
+static void parse_n_real(char *str, int *n, real **r, warninp_t wi)
+{
+ char *ptr[MAXPTR];
+ char *endptr;
+ int i;
+ char warn_buf[STRLEN];
+
+ *n = str_nelem(str, MAXPTR, ptr);
+
+ snew(*r, *n);
+ for (i = 0; i < *n; i++)
+ {
+ (*r)[i] = strtod(ptr[i], &endptr);
+ if (*endptr != 0)
+ {
+ sprintf(warn_buf, "Invalid value %s in string in mdp file. Expected a real number.", ptr[i]);
+ warning_error(wi, warn_buf);
+ }
+ }
+}
+
+static void do_fep_params(t_inputrec *ir, char fep_lambda[][STRLEN], char weights[STRLEN], warninp_t wi)
+{
+
+ int i, j, max_n_lambda, nweights, nfep[efptNR];
+ t_lambda *fep = ir->fepvals;
+ t_expanded *expand = ir->expandedvals;
+ real **count_fep_lambdas;
+ gmx_bool bOneLambda = TRUE;
+
+ snew(count_fep_lambdas, efptNR);
+
+ /* FEP input processing */
+ /* first, identify the number of lambda values for each type.
+ All that are nonzero must have the same number */
+
+ for (i = 0; i < efptNR; i++)
+ {
+ parse_n_real(fep_lambda[i], &(nfep[i]), &(count_fep_lambdas[i]), wi);
+ }
+
+ /* now, determine the number of components. All must be either zero, or equal. */
+
+ max_n_lambda = 0;
+ for (i = 0; i < efptNR; i++)
+ {
+ if (nfep[i] > max_n_lambda)
+ {
+ max_n_lambda = nfep[i]; /* here's a nonzero one. All of them
+ must have the same number if its not zero.*/
+ break;
+ }
+ }
+
+ for (i = 0; i < efptNR; i++)
+ {
+ if (nfep[i] == 0)
+ {
+ ir->fepvals->separate_dvdl[i] = FALSE;
+ }
+ else if (nfep[i] == max_n_lambda)
+ {
+ if (i != efptTEMPERATURE) /* we treat this differently -- not really a reason to compute the derivative with
+ respect to the temperature currently */
+ {
+ ir->fepvals->separate_dvdl[i] = TRUE;
+ }
+ }
+ else
+ {
+ gmx_fatal(FARGS, "Number of lambdas (%d) for FEP type %s not equal to number of other types (%d)",
+ nfep[i], efpt_names[i], max_n_lambda);
+ }
+ }
+ /* we don't print out dhdl if the temperature is changing, since we can't correctly define dhdl in this case */
+ ir->fepvals->separate_dvdl[efptTEMPERATURE] = FALSE;
+
+ /* the number of lambdas is the number we've read in, which is either zero
+ or the same for all */
+ fep->n_lambda = max_n_lambda;
+
+ /* allocate space for the array of lambda values */
+ snew(fep->all_lambda, efptNR);
+ /* if init_lambda is defined, we need to set lambda */
+ if ((fep->init_lambda > 0) && (fep->n_lambda == 0))
+ {
+ ir->fepvals->separate_dvdl[efptFEP] = TRUE;
+ }
+ /* otherwise allocate the space for all of the lambdas, and transfer the data */
+ for (i = 0; i < efptNR; i++)
+ {
+ snew(fep->all_lambda[i], fep->n_lambda);
+ if (nfep[i] > 0) /* if it's zero, then the count_fep_lambda arrays
+ are zero */
+ {
+ for (j = 0; j < fep->n_lambda; j++)
+ {
+ fep->all_lambda[i][j] = (double)count_fep_lambdas[i][j];
+ }
+ sfree(count_fep_lambdas[i]);
+ }
+ }
+ sfree(count_fep_lambdas);
+
+ /* "fep-vals" is either zero or the full number. If zero, we'll need to define fep-lambdas for internal
+ bookkeeping -- for now, init_lambda */
+
+ if ((nfep[efptFEP] == 0) && (fep->init_lambda >= 0))
+ {
+ for (i = 0; i < fep->n_lambda; i++)
+ {
+ fep->all_lambda[efptFEP][i] = fep->init_lambda;
+ }
+ }
+
+ /* check to see if only a single component lambda is defined, and soft core is defined.
+ In this case, turn on coulomb soft core */
+
+ if (max_n_lambda == 0)
+ {
+ bOneLambda = TRUE;
+ }
+ else
+ {
+ for (i = 0; i < efptNR; i++)
+ {
+ if ((nfep[i] != 0) && (i != efptFEP))
+ {
+ bOneLambda = FALSE;
+ }
+ }
+ }
+ if ((bOneLambda) && (fep->sc_alpha > 0))
+ {
+ fep->bScCoul = TRUE;
+ }
+
+ /* Fill in the others with the efptFEP if they are not explicitly
+ specified (i.e. nfep[i] == 0). This means if fep is not defined,
+ they are all zero. */
+
+ for (i = 0; i < efptNR; i++)
+ {
+ if ((nfep[i] == 0) && (i != efptFEP))
+ {
+ for (j = 0; j < fep->n_lambda; j++)
+ {
+ fep->all_lambda[i][j] = fep->all_lambda[efptFEP][j];
+ }
+ }
+ }
+
+
+ /* make it easier if sc_r_power = 48 by increasing it to the 4th power, to be in the right scale. */
+ if (fep->sc_r_power == 48)
+ {
+ if (fep->sc_alpha > 0.1)
+ {
+ gmx_fatal(FARGS, "sc_alpha (%f) for sc_r_power = 48 should usually be between 0.001 and 0.004", fep->sc_alpha);
+ }
+ }
+
+ /* now read in the weights */
+ parse_n_real(weights, &nweights, &(expand->init_lambda_weights), wi);
+ if (nweights == 0)
+ {
+ snew(expand->init_lambda_weights, fep->n_lambda); /* initialize to zero */
+ }
+ else if (nweights != fep->n_lambda)
+ {
+ gmx_fatal(FARGS, "Number of weights (%d) is not equal to number of lambda values (%d)",
+ nweights, fep->n_lambda);
+ }
+ if ((expand->nstexpanded < 0) && (ir->efep != efepNO))
+ {
+ expand->nstexpanded = fep->nstdhdl;
+ /* if you don't specify nstexpanded when doing expanded ensemble free energy calcs, it is set to nstdhdl */
+ }
+ if ((expand->nstexpanded < 0) && ir->bSimTemp)
+ {
+ expand->nstexpanded = 2*(int)(ir->opts.tau_t[0]/ir->delta_t);
+ /* if you don't specify nstexpanded when doing expanded ensemble simulated tempering, it is set to
+ 2*tau_t just to be careful so it's not to frequent */
+ }
+}
+
+
+static void do_simtemp_params(t_inputrec *ir)
+{
+
+ snew(ir->simtempvals->temperatures, ir->fepvals->n_lambda);
+ GetSimTemps(ir->fepvals->n_lambda, ir->simtempvals, ir->fepvals->all_lambda[efptTEMPERATURE]);
+
+ return;
+}
+
+static void do_wall_params(t_inputrec *ir,
+ char *wall_atomtype, char *wall_density,
+ t_gromppopts *opts)
+{
+ int nstr, i;
+ char *names[MAXPTR];
+ double dbl;
+
+ opts->wall_atomtype[0] = NULL;
+ opts->wall_atomtype[1] = NULL;
+
+ ir->wall_atomtype[0] = -1;
+ ir->wall_atomtype[1] = -1;
+ ir->wall_density[0] = 0;
+ ir->wall_density[1] = 0;
+
+ if (ir->nwall > 0)
+ {
+ nstr = str_nelem(wall_atomtype, MAXPTR, names);
+ if (nstr != ir->nwall)
+ {
+ gmx_fatal(FARGS, "Expected %d elements for wall_atomtype, found %d",
+ ir->nwall, nstr);
+ }
+ for (i = 0; i < ir->nwall; i++)
+ {
+ opts->wall_atomtype[i] = gmx_strdup(names[i]);
+ }
+
+ if (ir->wall_type == ewt93 || ir->wall_type == ewt104)
+ {
+ nstr = str_nelem(wall_density, MAXPTR, names);
+ if (nstr != ir->nwall)
+ {
+ gmx_fatal(FARGS, "Expected %d elements for wall-density, found %d", ir->nwall, nstr);
+ }
+ for (i = 0; i < ir->nwall; i++)
+ {
+ sscanf(names[i], "%lf", &dbl);
+ if (dbl <= 0)
+ {
+ gmx_fatal(FARGS, "wall-density[%d] = %f\n", i, dbl);
+ }
+ ir->wall_density[i] = dbl;
+ }
+ }
+ }
+}
+
+static void add_wall_energrps(gmx_groups_t *groups, int nwall, t_symtab *symtab)
+{
+ int i;
+ t_grps *grps;
+ char str[STRLEN];
+
+ if (nwall > 0)
+ {
+ srenew(groups->grpname, groups->ngrpname+nwall);
+ grps = &(groups->grps[egcENER]);
+ srenew(grps->nm_ind, grps->nr+nwall);
+ for (i = 0; i < nwall; i++)
+ {
+ sprintf(str, "wall%d", i);
+ groups->grpname[groups->ngrpname] = put_symtab(symtab, str);
+ grps->nm_ind[grps->nr++] = groups->ngrpname++;
+ }
+ }
+}
+
+void read_expandedparams(int *ninp_p, t_inpfile **inp_p,
+ t_expanded *expand, warninp_t wi)
+{
+ int ninp;
+ t_inpfile *inp;
+
+ ninp = *ninp_p;
+ inp = *inp_p;
+
+ /* read expanded ensemble parameters */
+ CCTYPE ("expanded ensemble variables");
+ ITYPE ("nstexpanded", expand->nstexpanded, -1);
+ EETYPE("lmc-stats", expand->elamstats, elamstats_names);
+ EETYPE("lmc-move", expand->elmcmove, elmcmove_names);
+ EETYPE("lmc-weights-equil", expand->elmceq, elmceq_names);
+ ITYPE ("weight-equil-number-all-lambda", expand->equil_n_at_lam, -1);
+ ITYPE ("weight-equil-number-samples", expand->equil_samples, -1);
+ ITYPE ("weight-equil-number-steps", expand->equil_steps, -1);
+ RTYPE ("weight-equil-wl-delta", expand->equil_wl_delta, -1);
+ RTYPE ("weight-equil-count-ratio", expand->equil_ratio, -1);
+ CCTYPE("Seed for Monte Carlo in lambda space");
+ ITYPE ("lmc-seed", expand->lmc_seed, -1);
+ RTYPE ("mc-temperature", expand->mc_temp, -1);
+ ITYPE ("lmc-repeats", expand->lmc_repeats, 1);
+ ITYPE ("lmc-gibbsdelta", expand->gibbsdeltalam, -1);
+ ITYPE ("lmc-forced-nstart", expand->lmc_forced_nstart, 0);
+ EETYPE("symmetrized-transition-matrix", expand->bSymmetrizedTMatrix, yesno_names);
+ ITYPE("nst-transition-matrix", expand->nstTij, -1);
+ ITYPE ("mininum-var-min", expand->minvarmin, 100); /*default is reasonable */
+ ITYPE ("weight-c-range", expand->c_range, 0); /* default is just C=0 */
+ RTYPE ("wl-scale", expand->wl_scale, 0.8);
+ RTYPE ("wl-ratio", expand->wl_ratio, 0.8);
+ RTYPE ("init-wl-delta", expand->init_wl_delta, 1.0);
+ EETYPE("wl-oneovert", expand->bWLoneovert, yesno_names);
+
+ *ninp_p = ninp;
+ *inp_p = inp;
+
+ return;
+}
+
+/*! \brief Return whether an end state with the given coupling-lambda
+ * value describes fully-interacting VDW.
+ *
+ * \param[in] couple_lambda_value Enumeration ecouplam value describing the end state
+ * \return Whether VDW is on (i.e. the user chose vdw or vdw-q in the .mdp file)
+ */
+static gmx_bool couple_lambda_has_vdw_on(int couple_lambda_value)
+{
+ return (couple_lambda_value == ecouplamVDW ||
+ couple_lambda_value == ecouplamVDWQ);
+}
+
+void get_ir(const char *mdparin, const char *mdparout,
+ t_inputrec *ir, t_gromppopts *opts,
+ warninp_t wi)
+{
+ char *dumstr[2];
+ double dumdub[2][6];
+ t_inpfile *inp;
+ const char *tmp;
+ int i, j, m, ninp;
+ char warn_buf[STRLEN];
+ t_lambda *fep = ir->fepvals;
+ t_expanded *expand = ir->expandedvals;
+
+ init_inputrec_strings();
+ inp = read_inpfile(mdparin, &ninp, wi);
+
+ snew(dumstr[0], STRLEN);
+ snew(dumstr[1], STRLEN);
+
+ if (-1 == search_einp(ninp, inp, "cutoff-scheme"))
+ {
+ sprintf(warn_buf,
+ "%s did not specify a value for the .mdp option "
+ "\"cutoff-scheme\". Probably it was first intended for use "
+ "with GROMACS before 4.6. In 4.6, the Verlet scheme was "
+ "introduced, but the group scheme was still the default. "
+ "The default is now the Verlet scheme, so you will observe "
+ "different behaviour.", mdparin);
+ warning_note(wi, warn_buf);
+ }
+
+ /* ignore the following deprecated commands */
+ REM_TYPE("title");
+ REM_TYPE("cpp");
+ REM_TYPE("domain-decomposition");
+ REM_TYPE("andersen-seed");
+ REM_TYPE("dihre");
+ REM_TYPE("dihre-fc");
+ REM_TYPE("dihre-tau");
+ REM_TYPE("nstdihreout");
+ REM_TYPE("nstcheckpoint");
+ REM_TYPE("optimize-fft");
+ REM_TYPE("adress_type");
+ REM_TYPE("adress_const_wf");
+ REM_TYPE("adress_ex_width");
+ REM_TYPE("adress_hy_width");
+ REM_TYPE("adress_ex_forcecap");
+ REM_TYPE("adress_interface_correction");
+ REM_TYPE("adress_site");
+ REM_TYPE("adress_reference_coords");
+ REM_TYPE("adress_tf_grp_names");
+ REM_TYPE("adress_cg_grp_names");
+ REM_TYPE("adress_do_hybridpairs");
+ REM_TYPE("rlistlong");
+ REM_TYPE("nstcalclr");
+
+ /* replace the following commands with the clearer new versions*/
+ REPL_TYPE("unconstrained-start", "continuation");
+ REPL_TYPE("foreign-lambda", "fep-lambdas");
+ REPL_TYPE("verlet-buffer-drift", "verlet-buffer-tolerance");
+ REPL_TYPE("nstxtcout", "nstxout-compressed");
+ REPL_TYPE("xtc-grps", "compressed-x-grps");
+ REPL_TYPE("xtc-precision", "compressed-x-precision");
+
+ CCTYPE ("VARIOUS PREPROCESSING OPTIONS");
+ CTYPE ("Preprocessor information: use cpp syntax.");
+ CTYPE ("e.g.: -I/home/joe/doe -I/home/mary/roe");
+ STYPE ("include", opts->include, NULL);
+ CTYPE ("e.g.: -DPOSRES -DFLEXIBLE (note these variable names are case sensitive)");
+ STYPE ("define", opts->define, NULL);
+
+ CCTYPE ("RUN CONTROL PARAMETERS");
+ EETYPE("integrator", ir->eI, ei_names);
+ CTYPE ("Start time and timestep in ps");
+ RTYPE ("tinit", ir->init_t, 0.0);
+ RTYPE ("dt", ir->delta_t, 0.001);
+ STEPTYPE ("nsteps", ir->nsteps, 0);
+ CTYPE ("For exact run continuation or redoing part of a run");
+ STEPTYPE ("init-step", ir->init_step, 0);
+ CTYPE ("Part index is updated automatically on checkpointing (keeps files separate)");
+ ITYPE ("simulation-part", ir->simulation_part, 1);
+ CTYPE ("mode for center of mass motion removal");
+ EETYPE("comm-mode", ir->comm_mode, ecm_names);
+ CTYPE ("number of steps for center of mass motion removal");
+ ITYPE ("nstcomm", ir->nstcomm, 100);
+ CTYPE ("group(s) for center of mass motion removal");
+ STYPE ("comm-grps", is->vcm, NULL);
+
+ CCTYPE ("LANGEVIN DYNAMICS OPTIONS");
+ CTYPE ("Friction coefficient (amu/ps) and random seed");
+ RTYPE ("bd-fric", ir->bd_fric, 0.0);
+ STEPTYPE ("ld-seed", ir->ld_seed, -1);
+
+ /* Em stuff */
+ CCTYPE ("ENERGY MINIMIZATION OPTIONS");
+ CTYPE ("Force tolerance and initial step-size");
+ RTYPE ("emtol", ir->em_tol, 10.0);
+ RTYPE ("emstep", ir->em_stepsize, 0.01);
+ CTYPE ("Max number of iterations in relax-shells");
+ ITYPE ("niter", ir->niter, 20);
+ CTYPE ("Step size (ps^2) for minimization of flexible constraints");
+ RTYPE ("fcstep", ir->fc_stepsize, 0);
+ CTYPE ("Frequency of steepest descents steps when doing CG");
+ ITYPE ("nstcgsteep", ir->nstcgsteep, 1000);
+ ITYPE ("nbfgscorr", ir->nbfgscorr, 10);
+
+ CCTYPE ("TEST PARTICLE INSERTION OPTIONS");
+ RTYPE ("rtpi", ir->rtpi, 0.05);
+
+ /* Output options */
+ CCTYPE ("OUTPUT CONTROL OPTIONS");
+ CTYPE ("Output frequency for coords (x), velocities (v) and forces (f)");
+ ITYPE ("nstxout", ir->nstxout, 0);
+ ITYPE ("nstvout", ir->nstvout, 0);
+ ITYPE ("nstfout", ir->nstfout, 0);
+ CTYPE ("Output frequency for energies to log file and energy file");
+ ITYPE ("nstlog", ir->nstlog, 1000);
+ ITYPE ("nstcalcenergy", ir->nstcalcenergy, 100);
+ ITYPE ("nstenergy", ir->nstenergy, 1000);
+ CTYPE ("Output frequency and precision for .xtc file");
+ ITYPE ("nstxout-compressed", ir->nstxout_compressed, 0);
+ RTYPE ("compressed-x-precision", ir->x_compression_precision, 1000.0);
+ CTYPE ("This selects the subset of atoms for the compressed");
+ CTYPE ("trajectory file. You can select multiple groups. By");
+ CTYPE ("default, all atoms will be written.");
+ STYPE ("compressed-x-grps", is->x_compressed_groups, NULL);
+ CTYPE ("Selection of energy groups");
+ STYPE ("energygrps", is->energy, NULL);
+
+ /* Neighbor searching */
+ CCTYPE ("NEIGHBORSEARCHING PARAMETERS");
+ CTYPE ("cut-off scheme (Verlet: particle based cut-offs, group: using charge groups)");
+ EETYPE("cutoff-scheme", ir->cutoff_scheme, ecutscheme_names);
+ CTYPE ("nblist update frequency");
+ ITYPE ("nstlist", ir->nstlist, 10);
+ CTYPE ("ns algorithm (simple or grid)");
+ EETYPE("ns-type", ir->ns_type, ens_names);
+ CTYPE ("Periodic boundary conditions: xyz, no, xy");
+ EETYPE("pbc", ir->ePBC, epbc_names);
+ EETYPE("periodic-molecules", ir->bPeriodicMols, yesno_names);
+ CTYPE ("Allowed energy error due to the Verlet buffer in kJ/mol/ps per atom,");
+ CTYPE ("a value of -1 means: use rlist");
+ RTYPE("verlet-buffer-tolerance", ir->verletbuf_tol, 0.005);
+ CTYPE ("nblist cut-off");
+ RTYPE ("rlist", ir->rlist, 1.0);
+ CTYPE ("long-range cut-off for switched potentials");
+
+ /* Electrostatics */
+ CCTYPE ("OPTIONS FOR ELECTROSTATICS AND VDW");
+ CTYPE ("Method for doing electrostatics");
+ EETYPE("coulombtype", ir->coulombtype, eel_names);
+ EETYPE("coulomb-modifier", ir->coulomb_modifier, eintmod_names);
+ CTYPE ("cut-off lengths");
+ RTYPE ("rcoulomb-switch", ir->rcoulomb_switch, 0.0);
+ RTYPE ("rcoulomb", ir->rcoulomb, 1.0);
+ CTYPE ("Relative dielectric constant for the medium and the reaction field");
+ RTYPE ("epsilon-r", ir->epsilon_r, 1.0);
+ RTYPE ("epsilon-rf", ir->epsilon_rf, 0.0);
+ CTYPE ("Method for doing Van der Waals");
+ EETYPE("vdw-type", ir->vdwtype, evdw_names);
+ EETYPE("vdw-modifier", ir->vdw_modifier, eintmod_names);
+ CTYPE ("cut-off lengths");
+ RTYPE ("rvdw-switch", ir->rvdw_switch, 0.0);
+ RTYPE ("rvdw", ir->rvdw, 1.0);
+ CTYPE ("Apply long range dispersion corrections for Energy and Pressure");
+ EETYPE("DispCorr", ir->eDispCorr, edispc_names);
+ CTYPE ("Extension of the potential lookup tables beyond the cut-off");
+ RTYPE ("table-extension", ir->tabext, 1.0);
+ CTYPE ("Separate tables between energy group pairs");
+ STYPE ("energygrp-table", is->egptable, NULL);
+ CTYPE ("Spacing for the PME/PPPM FFT grid");
+ RTYPE ("fourierspacing", ir->fourier_spacing, 0.12);
+ CTYPE ("FFT grid size, when a value is 0 fourierspacing will be used");
+ ITYPE ("fourier-nx", ir->nkx, 0);
+ ITYPE ("fourier-ny", ir->nky, 0);
+ ITYPE ("fourier-nz", ir->nkz, 0);
+ CTYPE ("EWALD/PME/PPPM parameters");
+ ITYPE ("pme-order", ir->pme_order, 4);
+ RTYPE ("ewald-rtol", ir->ewald_rtol, 0.00001);
+ RTYPE ("ewald-rtol-lj", ir->ewald_rtol_lj, 0.001);
+ EETYPE("lj-pme-comb-rule", ir->ljpme_combination_rule, eljpme_names);
+ EETYPE("ewald-geometry", ir->ewald_geometry, eewg_names);
+ RTYPE ("epsilon-surface", ir->epsilon_surface, 0.0);
+
+ CCTYPE("IMPLICIT SOLVENT ALGORITHM");
+ EETYPE("implicit-solvent", ir->implicit_solvent, eis_names);
+
+ CCTYPE ("GENERALIZED BORN ELECTROSTATICS");
+ CTYPE ("Algorithm for calculating Born radii");
+ EETYPE("gb-algorithm", ir->gb_algorithm, egb_names);
+ CTYPE ("Frequency of calculating the Born radii inside rlist");
+ ITYPE ("nstgbradii", ir->nstgbradii, 1);
+ CTYPE ("Cutoff for Born radii calculation; the contribution from atoms");
+ CTYPE ("between rlist and rgbradii is updated every nstlist steps");
+ RTYPE ("rgbradii", ir->rgbradii, 1.0);
+ CTYPE ("Dielectric coefficient of the implicit solvent");
+ RTYPE ("gb-epsilon-solvent", ir->gb_epsilon_solvent, 80.0);
+ CTYPE ("Salt concentration in M for Generalized Born models");
+ RTYPE ("gb-saltconc", ir->gb_saltconc, 0.0);
+ CTYPE ("Scaling factors used in the OBC GB model. Default values are OBC(II)");
+ RTYPE ("gb-obc-alpha", ir->gb_obc_alpha, 1.0);
+ RTYPE ("gb-obc-beta", ir->gb_obc_beta, 0.8);
+ RTYPE ("gb-obc-gamma", ir->gb_obc_gamma, 4.85);
+ RTYPE ("gb-dielectric-offset", ir->gb_dielectric_offset, 0.009);
+ EETYPE("sa-algorithm", ir->sa_algorithm, esa_names);
+ CTYPE ("Surface tension (kJ/mol/nm^2) for the SA (nonpolar surface) part of GBSA");
+ CTYPE ("The value -1 will set default value for Still/HCT/OBC GB-models.");
+ RTYPE ("sa-surface-tension", ir->sa_surface_tension, -1);
+
+ /* Coupling stuff */
+ CCTYPE ("OPTIONS FOR WEAK COUPLING ALGORITHMS");
+ CTYPE ("Temperature coupling");
+ EETYPE("tcoupl", ir->etc, etcoupl_names);
+ ITYPE ("nsttcouple", ir->nsttcouple, -1);
+ ITYPE("nh-chain-length", ir->opts.nhchainlength, 10);
+ EETYPE("print-nose-hoover-chain-variables", ir->bPrintNHChains, yesno_names);
+ CTYPE ("Groups to couple separately");
+ STYPE ("tc-grps", is->tcgrps, NULL);
+ CTYPE ("Time constant (ps) and reference temperature (K)");
+ STYPE ("tau-t", is->tau_t, NULL);
+ STYPE ("ref-t", is->ref_t, NULL);
+ CTYPE ("pressure coupling");
+ EETYPE("pcoupl", ir->epc, epcoupl_names);
+ EETYPE("pcoupltype", ir->epct, epcoupltype_names);
+ ITYPE ("nstpcouple", ir->nstpcouple, -1);
+ CTYPE ("Time constant (ps), compressibility (1/bar) and reference P (bar)");
+ RTYPE ("tau-p", ir->tau_p, 1.0);
+ STYPE ("compressibility", dumstr[0], NULL);
+ STYPE ("ref-p", dumstr[1], NULL);
+ CTYPE ("Scaling of reference coordinates, No, All or COM");
+ EETYPE ("refcoord-scaling", ir->refcoord_scaling, erefscaling_names);
+
+ /* QMMM */
+ CCTYPE ("OPTIONS FOR QMMM calculations");
+ EETYPE("QMMM", ir->bQMMM, yesno_names);
+ CTYPE ("Groups treated Quantum Mechanically");
+ STYPE ("QMMM-grps", is->QMMM, NULL);
+ CTYPE ("QM method");
+ STYPE("QMmethod", is->QMmethod, NULL);
+ CTYPE ("QMMM scheme");
+ EETYPE("QMMMscheme", ir->QMMMscheme, eQMMMscheme_names);
+ CTYPE ("QM basisset");
+ STYPE("QMbasis", is->QMbasis, NULL);
+ CTYPE ("QM charge");
+ STYPE ("QMcharge", is->QMcharge, NULL);
+ CTYPE ("QM multiplicity");
+ STYPE ("QMmult", is->QMmult, NULL);
+ CTYPE ("Surface Hopping");
+ STYPE ("SH", is->bSH, NULL);
+ CTYPE ("CAS space options");
+ STYPE ("CASorbitals", is->CASorbitals, NULL);
+ STYPE ("CASelectrons", is->CASelectrons, NULL);
+ STYPE ("SAon", is->SAon, NULL);
+ STYPE ("SAoff", is->SAoff, NULL);
+ STYPE ("SAsteps", is->SAsteps, NULL);
+ CTYPE ("Scale factor for MM charges");
+ RTYPE ("MMChargeScaleFactor", ir->scalefactor, 1.0);
+ CTYPE ("Optimization of QM subsystem");
+ STYPE ("bOPT", is->bOPT, NULL);
+ STYPE ("bTS", is->bTS, NULL);
+
+ /* Simulated annealing */
+ CCTYPE("SIMULATED ANNEALING");
+ CTYPE ("Type of annealing for each temperature group (no/single/periodic)");
+ STYPE ("annealing", is->anneal, NULL);
+ CTYPE ("Number of time points to use for specifying annealing in each group");
+ STYPE ("annealing-npoints", is->anneal_npoints, NULL);
+ CTYPE ("List of times at the annealing points for each group");
+ STYPE ("annealing-time", is->anneal_time, NULL);
+ CTYPE ("Temp. at each annealing point, for each group.");
+ STYPE ("annealing-temp", is->anneal_temp, NULL);
+
+ /* Startup run */
+ CCTYPE ("GENERATE VELOCITIES FOR STARTUP RUN");
+ EETYPE("gen-vel", opts->bGenVel, yesno_names);
+ RTYPE ("gen-temp", opts->tempi, 300.0);
+ ITYPE ("gen-seed", opts->seed, -1);
+
+ /* Shake stuff */
+ CCTYPE ("OPTIONS FOR BONDS");
+ EETYPE("constraints", opts->nshake, constraints);
+ CTYPE ("Type of constraint algorithm");
+ EETYPE("constraint-algorithm", ir->eConstrAlg, econstr_names);
+ CTYPE ("Do not constrain the start configuration");
+ EETYPE("continuation", ir->bContinuation, yesno_names);
+ CTYPE ("Use successive overrelaxation to reduce the number of shake iterations");
+ EETYPE("Shake-SOR", ir->bShakeSOR, yesno_names);
+ CTYPE ("Relative tolerance of shake");
+ RTYPE ("shake-tol", ir->shake_tol, 0.0001);
+ CTYPE ("Highest order in the expansion of the constraint coupling matrix");
+ ITYPE ("lincs-order", ir->nProjOrder, 4);
+ CTYPE ("Number of iterations in the final step of LINCS. 1 is fine for");
+ CTYPE ("normal simulations, but use 2 to conserve energy in NVE runs.");
+ CTYPE ("For energy minimization with constraints it should be 4 to 8.");
+ ITYPE ("lincs-iter", ir->nLincsIter, 1);
+ CTYPE ("Lincs will write a warning to the stderr if in one step a bond");
+ CTYPE ("rotates over more degrees than");
+ RTYPE ("lincs-warnangle", ir->LincsWarnAngle, 30.0);
+ CTYPE ("Convert harmonic bonds to morse potentials");
+ EETYPE("morse", opts->bMorse, yesno_names);
+
+ /* Energy group exclusions */
+ CCTYPE ("ENERGY GROUP EXCLUSIONS");
+ CTYPE ("Pairs of energy groups for which all non-bonded interactions are excluded");
+ STYPE ("energygrp-excl", is->egpexcl, NULL);
+
+ /* Walls */
+ CCTYPE ("WALLS");
+ CTYPE ("Number of walls, type, atom types, densities and box-z scale factor for Ewald");
+ ITYPE ("nwall", ir->nwall, 0);
+ EETYPE("wall-type", ir->wall_type, ewt_names);
+ RTYPE ("wall-r-linpot", ir->wall_r_linpot, -1);
+ STYPE ("wall-atomtype", is->wall_atomtype, NULL);
+ STYPE ("wall-density", is->wall_density, NULL);
+ RTYPE ("wall-ewald-zfac", ir->wall_ewald_zfac, 3);
+
+ /* COM pulling */
+ CCTYPE("COM PULLING");
+ EETYPE("pull", ir->bPull, yesno_names);
+ if (ir->bPull)
+ {
+ snew(ir->pull, 1);
+ is->pull_grp = read_pullparams(&ninp, &inp, ir->pull, wi);
+ }
+
+ /* Enforced rotation */
+ CCTYPE("ENFORCED ROTATION");
+ CTYPE("Enforced rotation: No or Yes");
+ EETYPE("rotation", ir->bRot, yesno_names);
+ if (ir->bRot)
+ {
+ snew(ir->rot, 1);
+ is->rot_grp = read_rotparams(&ninp, &inp, ir->rot, wi);
+ }
+
+ /* Interactive MD */
+ ir->bIMD = FALSE;
+ CCTYPE("Group to display and/or manipulate in interactive MD session");
+ STYPE ("IMD-group", is->imd_grp, NULL);
+ if (is->imd_grp[0] != '\0')
+ {
+ snew(ir->imd, 1);
+ ir->bIMD = TRUE;
+ }
+
+ /* Refinement */
+ CCTYPE("NMR refinement stuff");
+ CTYPE ("Distance restraints type: No, Simple or Ensemble");
+ EETYPE("disre", ir->eDisre, edisre_names);
+ CTYPE ("Force weighting of pairs in one distance restraint: Conservative or Equal");
+ EETYPE("disre-weighting", ir->eDisreWeighting, edisreweighting_names);
+ CTYPE ("Use sqrt of the time averaged times the instantaneous violation");
+ EETYPE("disre-mixed", ir->bDisreMixed, yesno_names);
+ RTYPE ("disre-fc", ir->dr_fc, 1000.0);
+ RTYPE ("disre-tau", ir->dr_tau, 0.0);
+ CTYPE ("Output frequency for pair distances to energy file");
+ ITYPE ("nstdisreout", ir->nstdisreout, 100);
+ CTYPE ("Orientation restraints: No or Yes");
+ EETYPE("orire", opts->bOrire, yesno_names);
+ CTYPE ("Orientation restraints force constant and tau for time averaging");
+ RTYPE ("orire-fc", ir->orires_fc, 0.0);
+ RTYPE ("orire-tau", ir->orires_tau, 0.0);
+ STYPE ("orire-fitgrp", is->orirefitgrp, NULL);
+ CTYPE ("Output frequency for trace(SD) and S to energy file");
+ ITYPE ("nstorireout", ir->nstorireout, 100);
+
+ /* free energy variables */
+ CCTYPE ("Free energy variables");
+ EETYPE("free-energy", ir->efep, efep_names);
+ STYPE ("couple-moltype", is->couple_moltype, NULL);
+ EETYPE("couple-lambda0", opts->couple_lam0, couple_lam);
+ EETYPE("couple-lambda1", opts->couple_lam1, couple_lam);
+ EETYPE("couple-intramol", opts->bCoupleIntra, yesno_names);
+
+ RTYPE ("init-lambda", fep->init_lambda, -1); /* start with -1 so
+ we can recognize if
+ it was not entered */
+ ITYPE ("init-lambda-state", fep->init_fep_state, -1);
+ RTYPE ("delta-lambda", fep->delta_lambda, 0.0);
+ ITYPE ("nstdhdl", fep->nstdhdl, 50);
+ STYPE ("fep-lambdas", is->fep_lambda[efptFEP], NULL);
+ STYPE ("mass-lambdas", is->fep_lambda[efptMASS], NULL);
+ STYPE ("coul-lambdas", is->fep_lambda[efptCOUL], NULL);
+ STYPE ("vdw-lambdas", is->fep_lambda[efptVDW], NULL);
+ STYPE ("bonded-lambdas", is->fep_lambda[efptBONDED], NULL);
+ STYPE ("restraint-lambdas", is->fep_lambda[efptRESTRAINT], NULL);
+ STYPE ("temperature-lambdas", is->fep_lambda[efptTEMPERATURE], NULL);
+ ITYPE ("calc-lambda-neighbors", fep->lambda_neighbors, 1);
+ STYPE ("init-lambda-weights", is->lambda_weights, NULL);
+ EETYPE("dhdl-print-energy", fep->edHdLPrintEnergy, edHdLPrintEnergy_names);
+ RTYPE ("sc-alpha", fep->sc_alpha, 0.0);
+ ITYPE ("sc-power", fep->sc_power, 1);
+ RTYPE ("sc-r-power", fep->sc_r_power, 6.0);
+ RTYPE ("sc-sigma", fep->sc_sigma, 0.3);
+ EETYPE("sc-coul", fep->bScCoul, yesno_names);
+ ITYPE ("dh_hist_size", fep->dh_hist_size, 0);
+ RTYPE ("dh_hist_spacing", fep->dh_hist_spacing, 0.1);
+ EETYPE("separate-dhdl-file", fep->separate_dhdl_file,
+ separate_dhdl_file_names);
+ EETYPE("dhdl-derivatives", fep->dhdl_derivatives, dhdl_derivatives_names);
+ ITYPE ("dh_hist_size", fep->dh_hist_size, 0);
+ RTYPE ("dh_hist_spacing", fep->dh_hist_spacing, 0.1);
+
+ /* Non-equilibrium MD stuff */
+ CCTYPE("Non-equilibrium MD stuff");
+ STYPE ("acc-grps", is->accgrps, NULL);
+ STYPE ("accelerate", is->acc, NULL);
+ STYPE ("freezegrps", is->freeze, NULL);
+ STYPE ("freezedim", is->frdim, NULL);
+ RTYPE ("cos-acceleration", ir->cos_accel, 0);
+ STYPE ("deform", is->deform, NULL);
+
+ /* simulated tempering variables */
+ CCTYPE("simulated tempering variables");
+ EETYPE("simulated-tempering", ir->bSimTemp, yesno_names);
+ EETYPE("simulated-tempering-scaling", ir->simtempvals->eSimTempScale, esimtemp_names);
+ RTYPE("sim-temp-low", ir->simtempvals->simtemp_low, 300.0);
+ RTYPE("sim-temp-high", ir->simtempvals->simtemp_high, 300.0);
+
+ /* expanded ensemble variables */
+ if (ir->efep == efepEXPANDED || ir->bSimTemp)
+ {
+ read_expandedparams(&ninp, &inp, expand, wi);
+ }
+
+ /* Electric fields */
+ CCTYPE("Electric fields");
+ CTYPE ("Format is number of terms (int) and for all terms an amplitude (real)");
+ CTYPE ("and a phase angle (real)");
+ STYPE ("E-x", is->efield_x, NULL);
+ CTYPE ("Time dependent (pulsed) electric field. Format is omega, time for pulse");
+ CTYPE ("peak, and sigma (width) for pulse. Sigma = 0 removes pulse, leaving");
+ CTYPE ("the field to be a cosine function.");
+ STYPE ("E-xt", is->efield_xt, NULL);
+ STYPE ("E-y", is->efield_y, NULL);
+ STYPE ("E-yt", is->efield_yt, NULL);
+ STYPE ("E-z", is->efield_z, NULL);
+ STYPE ("E-zt", is->efield_zt, NULL);
+
+ /* Ion/water position swapping ("computational electrophysiology") */
+ CCTYPE("Ion/water position swapping for computational electrophysiology setups");
+ CTYPE("Swap positions along direction: no, X, Y, Z");
+ EETYPE("swapcoords", ir->eSwapCoords, eSwapTypes_names);
+ if (ir->eSwapCoords != eswapNO)
+ {
+ char buf[STRLEN];
+ int nIonTypes;
+
+
+ snew(ir->swap, 1);
+ CTYPE("Swap attempt frequency");
+ ITYPE("swap-frequency", ir->swap->nstswap, 1);
+ CTYPE("Number of ion types to be controlled");
+ ITYPE("iontypes", nIonTypes, 1);
+ if (nIonTypes < 1)
+ {
+ warning_error(wi, "You need to provide at least one ion type for position exchanges.");
+ }
+ ir->swap->ngrp = nIonTypes + eSwapFixedGrpNR;
+ snew(ir->swap->grp, ir->swap->ngrp);
+ for (i = 0; i < ir->swap->ngrp; i++)
+ {
+ snew(ir->swap->grp[i].molname, STRLEN);
+ }
+ CTYPE("Two index groups that contain the compartment-partitioning atoms");
+ STYPE("split-group0", ir->swap->grp[eGrpSplit0].molname, NULL);
+ STYPE("split-group1", ir->swap->grp[eGrpSplit1].molname, NULL);
+ CTYPE("Use center of mass of split groups (yes/no), otherwise center of geometry is used");
+ EETYPE("massw-split0", ir->swap->massw_split[0], yesno_names);
+ EETYPE("massw-split1", ir->swap->massw_split[1], yesno_names);
+
+ CTYPE("Name of solvent molecules");
+ STYPE("solvent-group", ir->swap->grp[eGrpSolvent].molname, NULL);
+
+ CTYPE("Split cylinder: radius, upper and lower extension (nm) (this will define the channels)");
+ CTYPE("Note that the split cylinder settings do not have an influence on the swapping protocol,");
+ CTYPE("however, if correctly defined, the permeation events are recorded per channel");
+ RTYPE("cyl0-r", ir->swap->cyl0r, 2.0);
+ RTYPE("cyl0-up", ir->swap->cyl0u, 1.0);
+ RTYPE("cyl0-down", ir->swap->cyl0l, 1.0);
+ RTYPE("cyl1-r", ir->swap->cyl1r, 2.0);
+ RTYPE("cyl1-up", ir->swap->cyl1u, 1.0);
+ RTYPE("cyl1-down", ir->swap->cyl1l, 1.0);
+
+ CTYPE("Average the number of ions per compartment over these many swap attempt steps");
+ ITYPE("coupl-steps", ir->swap->nAverage, 10);
+
+ CTYPE("Names of the ion types that can be exchanged with solvent molecules,");
+ CTYPE("and the requested number of ions of this type in compartments A and B");
+ CTYPE("-1 means fix the numbers as found in step 0");
+ for (i = 0; i < nIonTypes; i++)
+ {
+ int ig = eSwapFixedGrpNR + i;
+
+ sprintf(buf, "iontype%d-name", i);
+ STYPE(buf, ir->swap->grp[ig].molname, NULL);
+ sprintf(buf, "iontype%d-in-A", i);
+ ITYPE(buf, ir->swap->grp[ig].nmolReq[0], -1);
+ sprintf(buf, "iontype%d-in-B", i);
+ ITYPE(buf, ir->swap->grp[ig].nmolReq[1], -1);
+ }
+
+ CTYPE("By default (i.e. bulk offset = 0.0), ion/water exchanges happen between layers");
+ CTYPE("at maximum distance (= bulk concentration) to the split group layers. However,");
+ CTYPE("an offset b (-1.0 < b < +1.0) can be specified to offset the bulk layer from the middle at 0.0");
+ CTYPE("towards one of the compartment-partitioning layers (at +/- 1.0).");
+ RTYPE("bulk-offsetA", ir->swap->bulkOffset[0], 0.0);
+ RTYPE("bulk-offsetB", ir->swap->bulkOffset[1], 0.0);
+ if (!(ir->swap->bulkOffset[0] > -1.0 && ir->swap->bulkOffset[0] < 1.0)
+ || !(ir->swap->bulkOffset[1] > -1.0 && ir->swap->bulkOffset[1] < 1.0) )
+ {
+ warning_error(wi, "Bulk layer offsets must be > -1.0 and < 1.0 !");
+ }
+
+ CTYPE("Start to swap ions if threshold difference to requested count is reached");
+ RTYPE("threshold", ir->swap->threshold, 1.0);
+ }
+
+ /* AdResS is no longer supported, but we need mdrun to be able to refuse to run old AdResS .tpr files */
+ EETYPE("adress", ir->bAdress, yesno_names);
+
+ /* User defined thingies */
+ CCTYPE ("User defined thingies");
+ STYPE ("user1-grps", is->user1, NULL);
+ STYPE ("user2-grps", is->user2, NULL);
+ ITYPE ("userint1", ir->userint1, 0);
+ ITYPE ("userint2", ir->userint2, 0);
+ ITYPE ("userint3", ir->userint3, 0);
+ ITYPE ("userint4", ir->userint4, 0);
+ RTYPE ("userreal1", ir->userreal1, 0);
+ RTYPE ("userreal2", ir->userreal2, 0);
+ RTYPE ("userreal3", ir->userreal3, 0);
+ RTYPE ("userreal4", ir->userreal4, 0);
+#undef CTYPE
+
+ write_inpfile(mdparout, ninp, inp, FALSE, wi);
+ for (i = 0; (i < ninp); i++)
+ {
+ sfree(inp[i].name);
+ sfree(inp[i].value);
+ }
+ sfree(inp);
+
+ /* Process options if necessary */
+ for (m = 0; m < 2; m++)
+ {
+ for (i = 0; i < 2*DIM; i++)
+ {
+ dumdub[m][i] = 0.0;
+ }
+ if (ir->epc)
+ {
+ switch (ir->epct)
+ {
+ case epctISOTROPIC:
+ if (sscanf(dumstr[m], "%lf", &(dumdub[m][XX])) != 1)
+ {
+ warning_error(wi, "Pressure coupling not enough values (I need 1)");
+ }
+ dumdub[m][YY] = dumdub[m][ZZ] = dumdub[m][XX];
+ break;
+ case epctSEMIISOTROPIC:
+ case epctSURFACETENSION:
+ if (sscanf(dumstr[m], "%lf%lf",
+ &(dumdub[m][XX]), &(dumdub[m][ZZ])) != 2)
+ {
+ warning_error(wi, "Pressure coupling not enough values (I need 2)");
+ }
+ dumdub[m][YY] = dumdub[m][XX];
+ break;
+ case epctANISOTROPIC:
+ if (sscanf(dumstr[m], "%lf%lf%lf%lf%lf%lf",
+ &(dumdub[m][XX]), &(dumdub[m][YY]), &(dumdub[m][ZZ]),
+ &(dumdub[m][3]), &(dumdub[m][4]), &(dumdub[m][5])) != 6)
+ {
+ warning_error(wi, "Pressure coupling not enough values (I need 6)");
+ }
+ break;
+ default:
+ gmx_fatal(FARGS, "Pressure coupling type %s not implemented yet",
+ epcoupltype_names[ir->epct]);
+ }
+ }
+ }
+ clear_mat(ir->ref_p);
+ clear_mat(ir->compress);
+ for (i = 0; i < DIM; i++)
+ {
+ ir->ref_p[i][i] = dumdub[1][i];
+ ir->compress[i][i] = dumdub[0][i];
+ }
+ if (ir->epct == epctANISOTROPIC)
+ {
+ ir->ref_p[XX][YY] = dumdub[1][3];
+ ir->ref_p[XX][ZZ] = dumdub[1][4];
+ ir->ref_p[YY][ZZ] = dumdub[1][5];
+ if (ir->ref_p[XX][YY] != 0 && ir->ref_p[XX][ZZ] != 0 && ir->ref_p[YY][ZZ] != 0)
+ {
+ warning(wi, "All off-diagonal reference pressures are non-zero. Are you sure you want to apply a threefold shear stress?\n");
+ }
+ ir->compress[XX][YY] = dumdub[0][3];
+ ir->compress[XX][ZZ] = dumdub[0][4];
+ ir->compress[YY][ZZ] = dumdub[0][5];
+ for (i = 0; i < DIM; i++)
+ {
+ for (m = 0; m < i; m++)
+ {
+ ir->ref_p[i][m] = ir->ref_p[m][i];
+ ir->compress[i][m] = ir->compress[m][i];
+ }
+ }
+ }
+
+ if (ir->comm_mode == ecmNO)
+ {
+ ir->nstcomm = 0;
+ }
+
+ opts->couple_moltype = NULL;
+ if (strlen(is->couple_moltype) > 0)
+ {
+ if (ir->efep != efepNO)
+ {
+ opts->couple_moltype = gmx_strdup(is->couple_moltype);
+ if (opts->couple_lam0 == opts->couple_lam1)
+ {
+ warning(wi, "The lambda=0 and lambda=1 states for coupling are identical");
+ }
+ if (ir->eI == eiMD && (opts->couple_lam0 == ecouplamNONE ||
+ opts->couple_lam1 == ecouplamNONE))
+ {
+ warning(wi, "For proper sampling of the (nearly) decoupled state, stochastic dynamics should be used");
+ }
+ }
+ else
+ {
+ warning_note(wi, "Free energy is turned off, so we will not decouple the molecule listed in your input.");
+ }
+ }
+ /* FREE ENERGY AND EXPANDED ENSEMBLE OPTIONS */
+ if (ir->efep != efepNO)
+ {
+ if (fep->delta_lambda > 0)
+ {
+ ir->efep = efepSLOWGROWTH;
+ }
+ }
+
+ if (fep->edHdLPrintEnergy == edHdLPrintEnergyYES)
+ {
+ fep->edHdLPrintEnergy = edHdLPrintEnergyTOTAL;
+ warning_note(wi, "Old option for dhdl-print-energy given: "
+ "changing \"yes\" to \"total\"\n");
+ }
+
+ if (ir->bSimTemp && (fep->edHdLPrintEnergy == edHdLPrintEnergyNO))
+ {
+ /* always print out the energy to dhdl if we are doing
+ expanded ensemble, since we need the total energy for
+ analysis if the temperature is changing. In some
+ conditions one may only want the potential energy, so
+ we will allow that if the appropriate mdp setting has
+ been enabled. Otherwise, total it is:
+ */
+ fep->edHdLPrintEnergy = edHdLPrintEnergyTOTAL;
+ }
+
+ if ((ir->efep != efepNO) || ir->bSimTemp)
+ {
+ ir->bExpanded = FALSE;
+ if ((ir->efep == efepEXPANDED) || ir->bSimTemp)
+ {
+ ir->bExpanded = TRUE;
+ }
+ do_fep_params(ir, is->fep_lambda, is->lambda_weights, wi);
+ if (ir->bSimTemp) /* done after fep params */
+ {
+ do_simtemp_params(ir);
+ }
+
+ /* Because sc-coul (=FALSE by default) only acts on the lambda state
+ * setup and not on the old way of specifying the free-energy setup,
+ * we should check for using soft-core when not needed, since that
+ * can complicate the sampling significantly.
+ * Note that we only check for the automated coupling setup.
+ * If the (advanced) user does FEP through manual topology changes,
+ * this check will not be triggered.
+ */
+ if (ir->efep != efepNO && ir->fepvals->n_lambda == 0 &&
+ ir->fepvals->sc_alpha != 0 &&
+ (couple_lambda_has_vdw_on(opts->couple_lam0) &&
+ couple_lambda_has_vdw_on(opts->couple_lam1)))
+ {
+ warning(wi, "You are using soft-core interactions while the Van der Waals interactions are not decoupled (note that the sc-coul option is only active when using lambda states). Although this will not lead to errors, you will need much more sampling than without soft-core interactions. Consider using sc-alpha=0.");
+ }
+ }
+ else
+ {
+ ir->fepvals->n_lambda = 0;
+ }
+
+ /* WALL PARAMETERS */
+
+ do_wall_params(ir, is->wall_atomtype, is->wall_density, opts);
+
+ /* ORIENTATION RESTRAINT PARAMETERS */
+
+ if (opts->bOrire && str_nelem(is->orirefitgrp, MAXPTR, NULL) != 1)
+ {
+ warning_error(wi, "ERROR: Need one orientation restraint fit group\n");
+ }
+
+ /* DEFORMATION PARAMETERS */
+
+ clear_mat(ir->deform);
+ for (i = 0; i < 6; i++)
+ {
+ dumdub[0][i] = 0;
+ }
+ sscanf(is->deform, "%lf %lf %lf %lf %lf %lf",
+ &(dumdub[0][0]), &(dumdub[0][1]), &(dumdub[0][2]),
+ &(dumdub[0][3]), &(dumdub[0][4]), &(dumdub[0][5]));
+ for (i = 0; i < 3; i++)
+ {
+ ir->deform[i][i] = dumdub[0][i];
+ }
+ ir->deform[YY][XX] = dumdub[0][3];
+ ir->deform[ZZ][XX] = dumdub[0][4];
+ ir->deform[ZZ][YY] = dumdub[0][5];
+ if (ir->epc != epcNO)
+ {
+ for (i = 0; i < 3; i++)
+ {
+ for (j = 0; j <= i; j++)
+ {
+ if (ir->deform[i][j] != 0 && ir->compress[i][j] != 0)
+ {
+ warning_error(wi, "A box element has deform set and compressibility > 0");
+ }
+ }
+ }
+ for (i = 0; i < 3; i++)
+ {
+ for (j = 0; j < i; j++)
+ {
+ if (ir->deform[i][j] != 0)
+ {
+ for (m = j; m < DIM; m++)
+ {
+ if (ir->compress[m][j] != 0)
+ {
+ sprintf(warn_buf, "An off-diagonal box element has deform set while compressibility > 0 for the same component of another box vector, this might lead to spurious periodicity effects.");
+ warning(wi, warn_buf);
+ }
+ }
+ }
+ }
+ }
+ }
+
+ /* Ion/water position swapping checks */
+ if (ir->eSwapCoords != eswapNO)
+ {
+ if (ir->swap->nstswap < 1)
+ {
+ warning_error(wi, "swap_frequency must be 1 or larger when ion swapping is requested");
+ }
+ if (ir->swap->nAverage < 1)
+ {
+ warning_error(wi, "coupl_steps must be 1 or larger.\n");
+ }
+ if (ir->swap->threshold < 1.0)
+ {
+ warning_error(wi, "Ion count threshold must be at least 1.\n");
+ }
+ }
+
+ sfree(dumstr[0]);
+ sfree(dumstr[1]);
+}
+
+static int search_QMstring(const char *s, int ng, const char *gn[])
+{
+ /* same as normal search_string, but this one searches QM strings */
+ int i;
+
+ for (i = 0; (i < ng); i++)
+ {
+ if (gmx_strcasecmp(s, gn[i]) == 0)
+ {
+ return i;
+ }
+ }
+
+ gmx_fatal(FARGS, "this QM method or basisset (%s) is not implemented\n!", s);
+
+ return -1;
+
+} /* search_QMstring */
+
+/* We would like gn to be const as well, but C doesn't allow this */
+/* TODO this is utility functionality (search for the index of a
+ string in a collection), so should be refactored and located more
+ centrally. */
+int search_string(const char *s, int ng, char *gn[])
+{
+ int i;
+
+ for (i = 0; (i < ng); i++)
+ {
+ if (gmx_strcasecmp(s, gn[i]) == 0)
+ {
+ return i;
+ }
+ }
+
+ gmx_fatal(FARGS,
+ "Group %s referenced in the .mdp file was not found in the index file.\n"
+ "Group names must match either [moleculetype] names or custom index group\n"
+ "names, in which case you must supply an index file to the '-n' option\n"
+ "of grompp.",
+ s);
+
+ return -1;
+}
+
+static gmx_bool do_numbering(int natoms, gmx_groups_t *groups, int ng, char *ptrs[],
+ t_blocka *block, char *gnames[],
+ int gtype, int restnm,
+ int grptp, gmx_bool bVerbose,
+ warninp_t wi)
+{
+ unsigned short *cbuf;
+ t_grps *grps = &(groups->grps[gtype]);
+ int i, j, gid, aj, ognr, ntot = 0;
+ const char *title;
+ gmx_bool bRest;
+ char warn_buf[STRLEN];
+
+ if (debug)
+ {
+ fprintf(debug, "Starting numbering %d groups of type %d\n", ng, gtype);
+ }
+
+ title = gtypes[gtype];
+
+ snew(cbuf, natoms);
+ /* Mark all id's as not set */
+ for (i = 0; (i < natoms); i++)
+ {
+ cbuf[i] = NOGID;
+ }
+
+ snew(grps->nm_ind, ng+1); /* +1 for possible rest group */
+ for (i = 0; (i < ng); i++)
+ {
+ /* Lookup the group name in the block structure */
+ gid = search_string(ptrs[i], block->nr, gnames);
+ if ((grptp != egrptpONE) || (i == 0))
+ {
+ grps->nm_ind[grps->nr++] = gid;
+ }
+ if (debug)
+ {
+ fprintf(debug, "Found gid %d for group %s\n", gid, ptrs[i]);
+ }
+
+ /* Now go over the atoms in the group */
+ for (j = block->index[gid]; (j < block->index[gid+1]); j++)
+ {
+
+ aj = block->a[j];
+
+ /* Range checking */
+ if ((aj < 0) || (aj >= natoms))
+ {
+ gmx_fatal(FARGS, "Invalid atom number %d in indexfile", aj);
+ }
+ /* Lookup up the old group number */
+ ognr = cbuf[aj];
+ if (ognr != NOGID)
+ {
+ gmx_fatal(FARGS, "Atom %d in multiple %s groups (%d and %d)",
+ aj+1, title, ognr+1, i+1);
+ }
+ else
+ {
+ /* Store the group number in buffer */
+ if (grptp == egrptpONE)
+ {
+ cbuf[aj] = 0;
+ }
+ else
+ {
+ cbuf[aj] = i;
+ }
+ ntot++;
+ }
+ }
+ }
+
+ /* Now check whether we have done all atoms */
+ bRest = FALSE;
+ if (ntot != natoms)
+ {
+ if (grptp == egrptpALL)
+ {
+ gmx_fatal(FARGS, "%d atoms are not part of any of the %s groups",
+ natoms-ntot, title);
+ }
+ else if (grptp == egrptpPART)
+ {
+ sprintf(warn_buf, "%d atoms are not part of any of the %s groups",
+ natoms-ntot, title);
+ warning_note(wi, warn_buf);
+ }
+ /* Assign all atoms currently unassigned to a rest group */
+ for (j = 0; (j < natoms); j++)
+ {
+ if (cbuf[j] == NOGID)
+ {
+ cbuf[j] = grps->nr;
+ bRest = TRUE;
+ }
+ }
+ if (grptp != egrptpPART)
+ {
+ if (bVerbose)
+ {
+ fprintf(stderr,
+ "Making dummy/rest group for %s containing %d elements\n",
+ title, natoms-ntot);
+ }
+ /* Add group name "rest" */
+ grps->nm_ind[grps->nr] = restnm;
+
+ /* Assign the rest name to all atoms not currently assigned to a group */
+ for (j = 0; (j < natoms); j++)
+ {
+ if (cbuf[j] == NOGID)
+ {
+ cbuf[j] = grps->nr;
+ }
+ }
+ grps->nr++;
+ }
+ }
+
+ if (grps->nr == 1 && (ntot == 0 || ntot == natoms))
+ {
+ /* All atoms are part of one (or no) group, no index required */
+ groups->ngrpnr[gtype] = 0;
+ groups->grpnr[gtype] = NULL;
+ }
+ else
+ {
+ groups->ngrpnr[gtype] = natoms;
+ snew(groups->grpnr[gtype], natoms);
+ for (j = 0; (j < natoms); j++)
+ {
+ groups->grpnr[gtype][j] = cbuf[j];
+ }
+ }
+
+ sfree(cbuf);
+
+ return (bRest && grptp == egrptpPART);
+}
+
+static void calc_nrdf(gmx_mtop_t *mtop, t_inputrec *ir, char **gnames)
+{
+ t_grpopts *opts;
+ gmx_groups_t *groups;
+ pull_params_t *pull;
+ int natoms, ai, aj, i, j, d, g, imin, jmin;
+ t_iatom *ia;
+ int *nrdf2, *na_vcm, na_tot;
+ double *nrdf_tc, *nrdf_vcm, nrdf_uc, n_sub = 0;
+ gmx_mtop_atomloop_all_t aloop;
+ t_atom *atom;
+ int mb, mol, ftype, as;
+ gmx_molblock_t *molb;
+ gmx_moltype_t *molt;
+
+ /* Calculate nrdf.
+ * First calc 3xnr-atoms for each group
+ * then subtract half a degree of freedom for each constraint
+ *
+ * Only atoms and nuclei contribute to the degrees of freedom...
+ */
+
+ opts = &ir->opts;
+
+ groups = &mtop->groups;
+ natoms = mtop->natoms;
+
+ /* Allocate one more for a possible rest group */
+ /* We need to sum degrees of freedom into doubles,
+ * since floats give too low nrdf's above 3 million atoms.
+ */
+ snew(nrdf_tc, groups->grps[egcTC].nr+1);
+ snew(nrdf_vcm, groups->grps[egcVCM].nr+1);
+ snew(na_vcm, groups->grps[egcVCM].nr+1);
+
+ for (i = 0; i < groups->grps[egcTC].nr; i++)
+ {
+ nrdf_tc[i] = 0;
+ }
+ for (i = 0; i < groups->grps[egcVCM].nr+1; i++)
+ {
+ nrdf_vcm[i] = 0;
+ }
+
+ snew(nrdf2, natoms);
+ aloop = gmx_mtop_atomloop_all_init(mtop);
+ while (gmx_mtop_atomloop_all_next(aloop, &i, &atom))
+ {
+ nrdf2[i] = 0;
+ if (atom->ptype == eptAtom || atom->ptype == eptNucleus)
+ {
+ g = ggrpnr(groups, egcFREEZE, i);
+ /* Double count nrdf for particle i */
+ for (d = 0; d < DIM; d++)
+ {
+ if (opts->nFreeze[g][d] == 0)
+ {
+ nrdf2[i] += 2;
+ }
+ }
+ nrdf_tc [ggrpnr(groups, egcTC, i)] += 0.5*nrdf2[i];
+ nrdf_vcm[ggrpnr(groups, egcVCM, i)] += 0.5*nrdf2[i];
+ }
+ }
+
+ as = 0;
+ for (mb = 0; mb < mtop->nmolblock; mb++)
+ {
+ molb = &mtop->molblock[mb];
+ molt = &mtop->moltype[molb->type];
+ atom = molt->atoms.atom;
+ for (mol = 0; mol < molb->nmol; mol++)
+ {
+ for (ftype = F_CONSTR; ftype <= F_CONSTRNC; ftype++)
+ {
+ ia = molt->ilist[ftype].iatoms;
+ for (i = 0; i < molt->ilist[ftype].nr; )
+ {
+ /* Subtract degrees of freedom for the constraints,
+ * if the particles still have degrees of freedom left.
+ * If one of the particles is a vsite or a shell, then all
+ * constraint motion will go there, but since they do not
+ * contribute to the constraints the degrees of freedom do not
+ * change.
+ */
+ ai = as + ia[1];
+ aj = as + ia[2];
+ if (((atom[ia[1]].ptype == eptNucleus) ||
+ (atom[ia[1]].ptype == eptAtom)) &&
+ ((atom[ia[2]].ptype == eptNucleus) ||
+ (atom[ia[2]].ptype == eptAtom)))
+ {
+ if (nrdf2[ai] > 0)
+ {
+ jmin = 1;
+ }
+ else
+ {
+ jmin = 2;
+ }
+ if (nrdf2[aj] > 0)
+ {
+ imin = 1;
+ }
+ else
+ {
+ imin = 2;
+ }
+ imin = std::min(imin, nrdf2[ai]);
+ jmin = std::min(jmin, nrdf2[aj]);
+ nrdf2[ai] -= imin;
+ nrdf2[aj] -= jmin;
+ nrdf_tc [ggrpnr(groups, egcTC, ai)] -= 0.5*imin;
+ nrdf_tc [ggrpnr(groups, egcTC, aj)] -= 0.5*jmin;
+ nrdf_vcm[ggrpnr(groups, egcVCM, ai)] -= 0.5*imin;
+ nrdf_vcm[ggrpnr(groups, egcVCM, aj)] -= 0.5*jmin;
+ }
+ ia += interaction_function[ftype].nratoms+1;
+ i += interaction_function[ftype].nratoms+1;
+ }
+ }
+ ia = molt->ilist[F_SETTLE].iatoms;
+ for (i = 0; i < molt->ilist[F_SETTLE].nr; )
+ {
+ /* Subtract 1 dof from every atom in the SETTLE */
+ for (j = 0; j < 3; j++)
+ {
+ ai = as + ia[1+j];
+ imin = std::min(2, nrdf2[ai]);
+ nrdf2[ai] -= imin;
+ nrdf_tc [ggrpnr(groups, egcTC, ai)] -= 0.5*imin;
+ nrdf_vcm[ggrpnr(groups, egcVCM, ai)] -= 0.5*imin;
+ }
+ ia += 4;
+ i += 4;
+ }
+ as += molt->atoms.nr;
+ }
+ }
+
+ if (ir->bPull)
+ {
+ /* Correct nrdf for the COM constraints.
+ * We correct using the TC and VCM group of the first atom
+ * in the reference and pull group. If atoms in one pull group
+ * belong to different TC or VCM groups it is anyhow difficult
+ * to determine the optimal nrdf assignment.
+ */
+ pull = ir->pull;
+
+ for (i = 0; i < pull->ncoord; i++)
+ {
+ if (pull->coord[i].eType != epullCONSTRAINT)
+ {
+ continue;
+ }
+
+ imin = 1;
+
+ for (j = 0; j < 2; j++)
+ {
+ const t_pull_group *pgrp;
+
+ pgrp = &pull->group[pull->coord[i].group[j]];
+
+ if (pgrp->nat > 0)
+ {
+ /* Subtract 1/2 dof from each group */
+ ai = pgrp->ind[0];
+ nrdf_tc [ggrpnr(groups, egcTC, ai)] -= 0.5*imin;
+ nrdf_vcm[ggrpnr(groups, egcVCM, ai)] -= 0.5*imin;
+ if (nrdf_tc[ggrpnr(groups, egcTC, ai)] < 0)
+ {
+ gmx_fatal(FARGS, "Center of mass pulling constraints caused the number of degrees of freedom for temperature coupling group %s to be negative", gnames[groups->grps[egcTC].nm_ind[ggrpnr(groups, egcTC, ai)]]);
+ }
+ }
+ else
+ {
+ /* We need to subtract the whole DOF from group j=1 */
+ imin += 1;
+ }
+ }
+ }
+ }
+
+ if (ir->nstcomm != 0)
+ {
+ /* Subtract 3 from the number of degrees of freedom in each vcm group
+ * when com translation is removed and 6 when rotation is removed
+ * as well.
+ */
+ switch (ir->comm_mode)
+ {
+ case ecmLINEAR:
+ n_sub = ndof_com(ir);
+ break;
+ case ecmANGULAR:
+ n_sub = 6;
+ break;
+ default:
+ gmx_incons("Checking comm_mode");
+ }
+
+ for (i = 0; i < groups->grps[egcTC].nr; i++)
+ {
+ /* Count the number of atoms of TC group i for every VCM group */
+ for (j = 0; j < groups->grps[egcVCM].nr+1; j++)
+ {
+ na_vcm[j] = 0;
+ }
+ na_tot = 0;
+ for (ai = 0; ai < natoms; ai++)
+ {
+ if (ggrpnr(groups, egcTC, ai) == i)
+ {
+ na_vcm[ggrpnr(groups, egcVCM, ai)]++;
+ na_tot++;
+ }
+ }
+ /* Correct for VCM removal according to the fraction of each VCM
+ * group present in this TC group.
+ */
+ nrdf_uc = nrdf_tc[i];
+ if (debug)
+ {
+ fprintf(debug, "T-group[%d] nrdf_uc = %g, n_sub = %g\n",
+ i, nrdf_uc, n_sub);
+ }
+ nrdf_tc[i] = 0;
+ for (j = 0; j < groups->grps[egcVCM].nr+1; j++)
+ {
+ if (nrdf_vcm[j] > n_sub)
+ {
+ nrdf_tc[i] += nrdf_uc*((double)na_vcm[j]/(double)na_tot)*
+ (nrdf_vcm[j] - n_sub)/nrdf_vcm[j];
+ }
+ if (debug)
+ {
+ fprintf(debug, " nrdf_vcm[%d] = %g, nrdf = %g\n",
+ j, nrdf_vcm[j], nrdf_tc[i]);
+ }
+ }
+ }
+ }
+ for (i = 0; (i < groups->grps[egcTC].nr); i++)
+ {
+ opts->nrdf[i] = nrdf_tc[i];
+ if (opts->nrdf[i] < 0)
+ {
+ opts->nrdf[i] = 0;
+ }
+ fprintf(stderr,
+ "Number of degrees of freedom in T-Coupling group %s is %.2f\n",
+ gnames[groups->grps[egcTC].nm_ind[i]], opts->nrdf[i]);
+ }
+
+ sfree(nrdf2);
+ sfree(nrdf_tc);
+ sfree(nrdf_vcm);
+ sfree(na_vcm);
+}
+
+static void decode_cos(char *s, t_cosines *cosine)
+{
+ char *t;
+ char format[STRLEN], f1[STRLEN];
+ double a, phi;
+ int i;
+
+ t = gmx_strdup(s);
+ trim(t);
+
+ cosine->n = 0;
+ cosine->a = NULL;
+ cosine->phi = NULL;
+ if (strlen(t))
+ {
+ sscanf(t, "%d", &(cosine->n));
+ if (cosine->n <= 0)
+ {
+ cosine->n = 0;
+ }
+ else
+ {
+ snew(cosine->a, cosine->n);
+ snew(cosine->phi, cosine->n);
+
+ sprintf(format, "%%*d");
+ for (i = 0; (i < cosine->n); i++)
+ {
+ strcpy(f1, format);
+ strcat(f1, "%lf%lf");
+ if (sscanf(t, f1, &a, &phi) < 2)
+ {
+ gmx_fatal(FARGS, "Invalid input for electric field shift: '%s'", t);
+ }
+ cosine->a[i] = a;
+ cosine->phi[i] = phi;
+ strcat(format, "%*lf%*lf");
+ }
+ }
+ }
+ sfree(t);
+}
+
+static gmx_bool do_egp_flag(t_inputrec *ir, gmx_groups_t *groups,
+ const char *option, const char *val, int flag)
+{
+ /* The maximum number of energy group pairs would be MAXPTR*(MAXPTR+1)/2.
+ * But since this is much larger than STRLEN, such a line can not be parsed.
+ * The real maximum is the number of names that fit in a string: STRLEN/2.
+ */
+#define EGP_MAX (STRLEN/2)
+ int nelem, i, j, k, nr;
+ char *names[EGP_MAX];
+ char ***gnames;
+ gmx_bool bSet;
+
+ gnames = groups->grpname;
+
+ nelem = str_nelem(val, EGP_MAX, names);
+ if (nelem % 2 != 0)
+ {
+ gmx_fatal(FARGS, "The number of groups for %s is odd", option);
+ }
+ nr = groups->grps[egcENER].nr;
+ bSet = FALSE;
+ for (i = 0; i < nelem/2; i++)
+ {
+ j = 0;
+ while ((j < nr) &&
+ gmx_strcasecmp(names[2*i], *(gnames[groups->grps[egcENER].nm_ind[j]])))
+ {
+ j++;
+ }
+ if (j == nr)
+ {
+ gmx_fatal(FARGS, "%s in %s is not an energy group\n",
+ names[2*i], option);
+ }
+ k = 0;
+ while ((k < nr) &&
+ gmx_strcasecmp(names[2*i+1], *(gnames[groups->grps[egcENER].nm_ind[k]])))
+ {
+ k++;
+ }
+ if (k == nr)
+ {
+ gmx_fatal(FARGS, "%s in %s is not an energy group\n",
+ names[2*i+1], option);
+ }
+ if ((j < nr) && (k < nr))
+ {
+ ir->opts.egp_flags[nr*j+k] |= flag;
+ ir->opts.egp_flags[nr*k+j] |= flag;
+ bSet = TRUE;
+ }
+ }
+
+ return bSet;
+}
+
+
+static void make_swap_groups(
+ t_swapcoords *swap,
+ t_blocka *grps,
+ char **gnames)
+{
+ int ig = -1, i = 0, gind;
+ t_swapGroup *swapg;
+
+
+ /* Just a quick check here, more thorough checks are in mdrun */
+ if (strcmp(swap->grp[eGrpSplit0].molname, swap->grp[eGrpSplit1].molname) == 0)
+ {
+ gmx_fatal(FARGS, "The split groups can not both be '%s'.", swap->grp[eGrpSplit0].molname);
+ }
+
+ /* Get the index atoms of the split0, split1, solvent, and swap groups */
+ for (ig = 0; ig < swap->ngrp; ig++)
+ {
+ swapg = &swap->grp[ig];
+ gind = search_string(swap->grp[ig].molname, grps->nr, gnames);
+ swapg->nat = grps->index[gind+1] - grps->index[gind];
+
+ if (swapg->nat > 0)
+ {
+ fprintf(stderr, "%s group '%s' contains %d atoms.\n",
+ ig < 3 ? eSwapFixedGrp_names[ig] : "Swap",
+ swap->grp[ig].molname, swapg->nat);
+ snew(swapg->ind, swapg->nat);
+ for (i = 0; i < swapg->nat; i++)
+ {
+ swapg->ind[i] = grps->a[grps->index[gind]+i];
+ }
+ }
+ else
+ {
+ gmx_fatal(FARGS, "Swap group %s does not contain any atoms.", swap->grp[ig].molname);
+ }
+ }
+}
+
+
+void make_IMD_group(t_IMD *IMDgroup, char *IMDgname, t_blocka *grps, char **gnames)
+{
+ int ig, i;
+
+
+ ig = search_string(IMDgname, grps->nr, gnames);
+ IMDgroup->nat = grps->index[ig+1] - grps->index[ig];
+
+ if (IMDgroup->nat > 0)
+ {
+ fprintf(stderr, "Group '%s' with %d atoms can be activated for interactive molecular dynamics (IMD).\n",
+ IMDgname, IMDgroup->nat);
+ snew(IMDgroup->ind, IMDgroup->nat);
+ for (i = 0; i < IMDgroup->nat; i++)
+ {
+ IMDgroup->ind[i] = grps->a[grps->index[ig]+i];
+ }
+ }
+}
+
+
+void do_index(const char* mdparin, const char *ndx,
+ gmx_mtop_t *mtop,
+ gmx_bool bVerbose,
+ t_inputrec *ir,
+ warninp_t wi)
+{
+ t_blocka *grps;
+ gmx_groups_t *groups;
+ int natoms;
+ t_symtab *symtab;
+ t_atoms atoms_all;
+ char warnbuf[STRLEN], **gnames;
+ int nr, ntcg, ntau_t, nref_t, nacc, nofg, nSA, nSA_points, nSA_time, nSA_temp;
+ real tau_min;
+ int nstcmin;
+ int nacg, nfreeze, nfrdim, nenergy, nvcm, nuser;
+ char *ptr1[MAXPTR], *ptr2[MAXPTR], *ptr3[MAXPTR];
+ int i, j, k, restnm;
+ gmx_bool bExcl, bTable, bSetTCpar, bAnneal, bRest;
+ int nQMmethod, nQMbasis, nQMg;
+ char warn_buf[STRLEN];
+ char* endptr;
+
+ if (bVerbose)
+ {
+ fprintf(stderr, "processing index file...\n");
+ }
+ if (ndx == NULL)
+ {
+ snew(grps, 1);
+ snew(grps->index, 1);
+ snew(gnames, 1);
+ atoms_all = gmx_mtop_global_atoms(mtop);
+ analyse(&atoms_all, grps, &gnames, FALSE, TRUE);
+ done_atom(&atoms_all);
+ }
+ else
+ {
+ grps = init_index(ndx, &gnames);
+ }
+
+ groups = &mtop->groups;
+ natoms = mtop->natoms;
+ symtab = &mtop->symtab;
+
+ snew(groups->grpname, grps->nr+1);
+
+ for (i = 0; (i < grps->nr); i++)
+ {
+ groups->grpname[i] = put_symtab(symtab, gnames[i]);
+ }
+ groups->grpname[i] = put_symtab(symtab, "rest");
+ restnm = i;
+ srenew(gnames, grps->nr+1);
+ gnames[restnm] = *(groups->grpname[i]);
+ groups->ngrpname = grps->nr+1;
+
+ set_warning_line(wi, mdparin, -1);
+
+ ntau_t = str_nelem(is->tau_t, MAXPTR, ptr1);
+ nref_t = str_nelem(is->ref_t, MAXPTR, ptr2);
+ ntcg = str_nelem(is->tcgrps, MAXPTR, ptr3);
+ if ((ntau_t != ntcg) || (nref_t != ntcg))
+ {
+ gmx_fatal(FARGS, "Invalid T coupling input: %d groups, %d ref-t values and "
+ "%d tau-t values", ntcg, nref_t, ntau_t);
+ }
+
+ bSetTCpar = (ir->etc || EI_SD(ir->eI) || ir->eI == eiBD || EI_TPI(ir->eI));
+ do_numbering(natoms, groups, ntcg, ptr3, grps, gnames, egcTC,
+ restnm, bSetTCpar ? egrptpALL : egrptpALL_GENREST, bVerbose, wi);
+ nr = groups->grps[egcTC].nr;
+ ir->opts.ngtc = nr;
+ snew(ir->opts.nrdf, nr);
+ snew(ir->opts.tau_t, nr);
+ snew(ir->opts.ref_t, nr);
+ if (ir->eI == eiBD && ir->bd_fric == 0)
+ {
+ fprintf(stderr, "bd-fric=0, so tau-t will be used as the inverse friction constant(s)\n");
+ }
+
+ if (bSetTCpar)
+ {
+ if (nr != nref_t)
+ {
+ gmx_fatal(FARGS, "Not enough ref-t and tau-t values!");
+ }
+
+ tau_min = 1e20;
+ for (i = 0; (i < nr); i++)
+ {
+ ir->opts.tau_t[i] = strtod(ptr1[i], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option tau-t. tau-t should only consist of real numbers separated by spaces.");
+ }
+ if ((ir->eI == eiBD || ir->eI == eiSD2) && ir->opts.tau_t[i] <= 0)
+ {
+ sprintf(warn_buf, "With integrator %s tau-t should be larger than 0", ei_names[ir->eI]);
+ warning_error(wi, warn_buf);
+ }
+
+ if (ir->etc != etcVRESCALE && ir->opts.tau_t[i] == 0)
+ {
+ warning_note(wi, "tau-t = -1 is the value to signal that a group should not have temperature coupling. Treating your use of tau-t = 0 as if you used -1.");
+ }
+
+ if (ir->opts.tau_t[i] >= 0)
+ {
+ tau_min = std::min(tau_min, ir->opts.tau_t[i]);
+ }
+ }
+ if (ir->etc != etcNO && ir->nsttcouple == -1)
+ {
+ ir->nsttcouple = ir_optimal_nsttcouple(ir);
+ }
+
+ if (EI_VV(ir->eI))
+ {
+ if ((ir->etc == etcNOSEHOOVER) && (ir->epc == epcBERENDSEN))
+ {
+ gmx_fatal(FARGS, "Cannot do Nose-Hoover temperature with Berendsen pressure control with md-vv; use either vrescale temperature with berendsen pressure or Nose-Hoover temperature with MTTK pressure");
+ }
- if (ir->nstpcouple != ir->nsttcouple)
++ if (ir->epc == epcMTTK)
+ {
- int mincouple = std::min(ir->nstpcouple, ir->nsttcouple);
- ir->nstpcouple = ir->nsttcouple = mincouple;
- sprintf(warn_buf, "for current Trotter decomposition methods with vv, nsttcouple and nstpcouple must be equal. Both have been reset to min(nsttcouple,nstpcouple) = %d", mincouple);
- warning_note(wi, warn_buf);
++ if (ir->etc != etcNOSEHOOVER)
+ {
++ gmx_fatal(FARGS, "Cannot do MTTK pressure coupling without Nose-Hoover temperature control");
++ }
++ else
++ {
++ if (ir->nstpcouple != ir->nsttcouple)
++ {
++ int mincouple = std::min(ir->nstpcouple, ir->nsttcouple);
++ ir->nstpcouple = ir->nsttcouple = mincouple;
++ sprintf(warn_buf, "for current Trotter decomposition methods with vv, nsttcouple and nstpcouple must be equal. Both have been reset to min(nsttcouple,nstpcouple) = %d", mincouple);
++ warning_note(wi, warn_buf);
++ }
+ }
+ }
+ }
+ /* velocity verlet with averaged kinetic energy KE = 0.5*(v(t+1/2) - v(t-1/2)) is implemented
+ primarily for testing purposes, and does not work with temperature coupling other than 1 */
+
+ if (ETC_ANDERSEN(ir->etc))
+ {
+ if (ir->nsttcouple != 1)
+ {
+ ir->nsttcouple = 1;
+ sprintf(warn_buf, "Andersen temperature control methods assume nsttcouple = 1; there is no need for larger nsttcouple > 1, since no global parameters are computed. nsttcouple has been reset to 1");
+ warning_note(wi, warn_buf);
+ }
+ }
+ nstcmin = tcouple_min_integration_steps(ir->etc);
+ if (nstcmin > 1)
+ {
+ if (tau_min/(ir->delta_t*ir->nsttcouple) < nstcmin - 10*GMX_REAL_EPS)
+ {
+ sprintf(warn_buf, "For proper integration of the %s thermostat, tau-t (%g) should be at least %d times larger than nsttcouple*dt (%g)",
+ ETCOUPLTYPE(ir->etc),
+ tau_min, nstcmin,
+ ir->nsttcouple*ir->delta_t);
+ warning(wi, warn_buf);
+ }
+ }
+ for (i = 0; (i < nr); i++)
+ {
+ ir->opts.ref_t[i] = strtod(ptr2[i], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option ref-t. ref-t should only consist of real numbers separated by spaces.");
+ }
+ if (ir->opts.ref_t[i] < 0)
+ {
+ gmx_fatal(FARGS, "ref-t for group %d negative", i);
+ }
+ }
+ /* set the lambda mc temperature to the md integrator temperature (which should be defined
+ if we are in this conditional) if mc_temp is negative */
+ if (ir->expandedvals->mc_temp < 0)
+ {
+ ir->expandedvals->mc_temp = ir->opts.ref_t[0]; /*for now, set to the first reft */
+ }
+ }
+
+ /* Simulated annealing for each group. There are nr groups */
+ nSA = str_nelem(is->anneal, MAXPTR, ptr1);
+ if (nSA == 1 && (ptr1[0][0] == 'n' || ptr1[0][0] == 'N'))
+ {
+ nSA = 0;
+ }
+ if (nSA > 0 && nSA != nr)
+ {
+ gmx_fatal(FARGS, "Not enough annealing values: %d (for %d groups)\n", nSA, nr);
+ }
+ else
+ {
+ snew(ir->opts.annealing, nr);
+ snew(ir->opts.anneal_npoints, nr);
+ snew(ir->opts.anneal_time, nr);
+ snew(ir->opts.anneal_temp, nr);
+ for (i = 0; i < nr; i++)
+ {
+ ir->opts.annealing[i] = eannNO;
+ ir->opts.anneal_npoints[i] = 0;
+ ir->opts.anneal_time[i] = NULL;
+ ir->opts.anneal_temp[i] = NULL;
+ }
+ if (nSA > 0)
+ {
+ bAnneal = FALSE;
+ for (i = 0; i < nr; i++)
+ {
+ if (ptr1[i][0] == 'n' || ptr1[i][0] == 'N')
+ {
+ ir->opts.annealing[i] = eannNO;
+ }
+ else if (ptr1[i][0] == 's' || ptr1[i][0] == 'S')
+ {
+ ir->opts.annealing[i] = eannSINGLE;
+ bAnneal = TRUE;
+ }
+ else if (ptr1[i][0] == 'p' || ptr1[i][0] == 'P')
+ {
+ ir->opts.annealing[i] = eannPERIODIC;
+ bAnneal = TRUE;
+ }
+ }
+ if (bAnneal)
+ {
+ /* Read the other fields too */
+ nSA_points = str_nelem(is->anneal_npoints, MAXPTR, ptr1);
+ if (nSA_points != nSA)
+ {
+ gmx_fatal(FARGS, "Found %d annealing-npoints values for %d groups\n", nSA_points, nSA);
+ }
+ for (k = 0, i = 0; i < nr; i++)
+ {
+ ir->opts.anneal_npoints[i] = strtol(ptr1[i], &endptr, 10);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option annealing-npoints. annealing should only consist of integers separated by spaces.");
+ }
+ if (ir->opts.anneal_npoints[i] == 1)
+ {
+ gmx_fatal(FARGS, "Please specify at least a start and an end point for annealing\n");
+ }
+ snew(ir->opts.anneal_time[i], ir->opts.anneal_npoints[i]);
+ snew(ir->opts.anneal_temp[i], ir->opts.anneal_npoints[i]);
+ k += ir->opts.anneal_npoints[i];
+ }
+
+ nSA_time = str_nelem(is->anneal_time, MAXPTR, ptr1);
+ if (nSA_time != k)
+ {
+ gmx_fatal(FARGS, "Found %d annealing-time values, wanter %d\n", nSA_time, k);
+ }
+ nSA_temp = str_nelem(is->anneal_temp, MAXPTR, ptr2);
+ if (nSA_temp != k)
+ {
+ gmx_fatal(FARGS, "Found %d annealing-temp values, wanted %d\n", nSA_temp, k);
+ }
+
+ for (i = 0, k = 0; i < nr; i++)
+ {
+
+ for (j = 0; j < ir->opts.anneal_npoints[i]; j++)
+ {
+ ir->opts.anneal_time[i][j] = strtod(ptr1[k], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option anneal-time. anneal-time should only consist of real numbers separated by spaces.");
+ }
+ ir->opts.anneal_temp[i][j] = strtod(ptr2[k], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for anneal-temp. anneal-temp should only consist of real numbers separated by spaces.");
+ }
+ if (j == 0)
+ {
+ if (ir->opts.anneal_time[i][0] > (ir->init_t+GMX_REAL_EPS))
+ {
+ gmx_fatal(FARGS, "First time point for annealing > init_t.\n");
+ }
+ }
+ else
+ {
+ /* j>0 */
+ if (ir->opts.anneal_time[i][j] < ir->opts.anneal_time[i][j-1])
+ {
+ gmx_fatal(FARGS, "Annealing timepoints out of order: t=%f comes after t=%f\n",
+ ir->opts.anneal_time[i][j], ir->opts.anneal_time[i][j-1]);
+ }
+ }
+ if (ir->opts.anneal_temp[i][j] < 0)
+ {
+ gmx_fatal(FARGS, "Found negative temperature in annealing: %f\n", ir->opts.anneal_temp[i][j]);
+ }
+ k++;
+ }
+ }
+ /* Print out some summary information, to make sure we got it right */
+ for (i = 0, k = 0; i < nr; i++)
+ {
+ if (ir->opts.annealing[i] != eannNO)
+ {
+ j = groups->grps[egcTC].nm_ind[i];
+ fprintf(stderr, "Simulated annealing for group %s: %s, %d timepoints\n",
+ *(groups->grpname[j]), eann_names[ir->opts.annealing[i]],
+ ir->opts.anneal_npoints[i]);
+ fprintf(stderr, "Time (ps) Temperature (K)\n");
+ /* All terms except the last one */
+ for (j = 0; j < (ir->opts.anneal_npoints[i]-1); j++)
+ {
+ fprintf(stderr, "%9.1f %5.1f\n", ir->opts.anneal_time[i][j], ir->opts.anneal_temp[i][j]);
+ }
+
+ /* Finally the last one */
+ j = ir->opts.anneal_npoints[i]-1;
+ if (ir->opts.annealing[i] == eannSINGLE)
+ {
+ fprintf(stderr, "%9.1f- %5.1f\n", ir->opts.anneal_time[i][j], ir->opts.anneal_temp[i][j]);
+ }
+ else
+ {
+ fprintf(stderr, "%9.1f %5.1f\n", ir->opts.anneal_time[i][j], ir->opts.anneal_temp[i][j]);
+ if (fabs(ir->opts.anneal_temp[i][j]-ir->opts.anneal_temp[i][0]) > GMX_REAL_EPS)
+ {
+ warning_note(wi, "There is a temperature jump when your annealing loops back.\n");
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+
+ if (ir->bPull)
+ {
+ make_pull_groups(ir->pull, is->pull_grp, grps, gnames);
+
+ make_pull_coords(ir->pull);
+ }
+
+ if (ir->bRot)
+ {
+ make_rotation_groups(ir->rot, is->rot_grp, grps, gnames);
+ }
+
+ if (ir->eSwapCoords != eswapNO)
+ {
+ make_swap_groups(ir->swap, grps, gnames);
+ }
+
+ /* Make indices for IMD session */
+ if (ir->bIMD)
+ {
+ make_IMD_group(ir->imd, is->imd_grp, grps, gnames);
+ }
+
+ nacc = str_nelem(is->acc, MAXPTR, ptr1);
+ nacg = str_nelem(is->accgrps, MAXPTR, ptr2);
+ if (nacg*DIM != nacc)
+ {
+ gmx_fatal(FARGS, "Invalid Acceleration input: %d groups and %d acc. values",
+ nacg, nacc);
+ }
+ do_numbering(natoms, groups, nacg, ptr2, grps, gnames, egcACC,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+ nr = groups->grps[egcACC].nr;
+ snew(ir->opts.acc, nr);
+ ir->opts.ngacc = nr;
+
+ for (i = k = 0; (i < nacg); i++)
+ {
+ for (j = 0; (j < DIM); j++, k++)
+ {
+ ir->opts.acc[i][j] = strtod(ptr1[k], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option accelerate. accelerate should only consist of real numbers separated by spaces.");
+ }
+ }
+ }
+ for (; (i < nr); i++)
+ {
+ for (j = 0; (j < DIM); j++)
+ {
+ ir->opts.acc[i][j] = 0;
+ }
+ }
+
+ nfrdim = str_nelem(is->frdim, MAXPTR, ptr1);
+ nfreeze = str_nelem(is->freeze, MAXPTR, ptr2);
+ if (nfrdim != DIM*nfreeze)
+ {
+ gmx_fatal(FARGS, "Invalid Freezing input: %d groups and %d freeze values",
+ nfreeze, nfrdim);
+ }
+ do_numbering(natoms, groups, nfreeze, ptr2, grps, gnames, egcFREEZE,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+ nr = groups->grps[egcFREEZE].nr;
+ ir->opts.ngfrz = nr;
+ snew(ir->opts.nFreeze, nr);
+ for (i = k = 0; (i < nfreeze); i++)
+ {
+ for (j = 0; (j < DIM); j++, k++)
+ {
+ ir->opts.nFreeze[i][j] = (gmx_strncasecmp(ptr1[k], "Y", 1) == 0);
+ if (!ir->opts.nFreeze[i][j])
+ {
+ if (gmx_strncasecmp(ptr1[k], "N", 1) != 0)
+ {
+ sprintf(warnbuf, "Please use Y(ES) or N(O) for freezedim only "
+ "(not %s)", ptr1[k]);
+ warning(wi, warn_buf);
+ }
+ }
+ }
+ }
+ for (; (i < nr); i++)
+ {
+ for (j = 0; (j < DIM); j++)
+ {
+ ir->opts.nFreeze[i][j] = 0;
+ }
+ }
+
+ nenergy = str_nelem(is->energy, MAXPTR, ptr1);
+ do_numbering(natoms, groups, nenergy, ptr1, grps, gnames, egcENER,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+ add_wall_energrps(groups, ir->nwall, symtab);
+ ir->opts.ngener = groups->grps[egcENER].nr;
+ nvcm = str_nelem(is->vcm, MAXPTR, ptr1);
+ bRest =
+ do_numbering(natoms, groups, nvcm, ptr1, grps, gnames, egcVCM,
+ restnm, nvcm == 0 ? egrptpALL_GENREST : egrptpPART, bVerbose, wi);
+ if (bRest)
+ {
+ warning(wi, "Some atoms are not part of any center of mass motion removal group.\n"
+ "This may lead to artifacts.\n"
+ "In most cases one should use one group for the whole system.");
+ }
+
+ /* Now we have filled the freeze struct, so we can calculate NRDF */
+ calc_nrdf(mtop, ir, gnames);
+
+ nuser = str_nelem(is->user1, MAXPTR, ptr1);
+ do_numbering(natoms, groups, nuser, ptr1, grps, gnames, egcUser1,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+ nuser = str_nelem(is->user2, MAXPTR, ptr1);
+ do_numbering(natoms, groups, nuser, ptr1, grps, gnames, egcUser2,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+ nuser = str_nelem(is->x_compressed_groups, MAXPTR, ptr1);
+ do_numbering(natoms, groups, nuser, ptr1, grps, gnames, egcCompressedX,
+ restnm, egrptpONE, bVerbose, wi);
+ nofg = str_nelem(is->orirefitgrp, MAXPTR, ptr1);
+ do_numbering(natoms, groups, nofg, ptr1, grps, gnames, egcORFIT,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+
+ /* QMMM input processing */
+ nQMg = str_nelem(is->QMMM, MAXPTR, ptr1);
+ nQMmethod = str_nelem(is->QMmethod, MAXPTR, ptr2);
+ nQMbasis = str_nelem(is->QMbasis, MAXPTR, ptr3);
+ if ((nQMmethod != nQMg) || (nQMbasis != nQMg))
+ {
+ gmx_fatal(FARGS, "Invalid QMMM input: %d groups %d basissets"
+ " and %d methods\n", nQMg, nQMbasis, nQMmethod);
+ }
+ /* group rest, if any, is always MM! */
+ do_numbering(natoms, groups, nQMg, ptr1, grps, gnames, egcQMMM,
+ restnm, egrptpALL_GENREST, bVerbose, wi);
+ nr = nQMg; /*atoms->grps[egcQMMM].nr;*/
+ ir->opts.ngQM = nQMg;
+ snew(ir->opts.QMmethod, nr);
+ snew(ir->opts.QMbasis, nr);
+ for (i = 0; i < nr; i++)
+ {
+ /* input consists of strings: RHF CASSCF PM3 .. These need to be
+ * converted to the corresponding enum in names.c
+ */
+ ir->opts.QMmethod[i] = search_QMstring(ptr2[i], eQMmethodNR,
+ eQMmethod_names);
+ ir->opts.QMbasis[i] = search_QMstring(ptr3[i], eQMbasisNR,
+ eQMbasis_names);
+
+ }
+ str_nelem(is->QMmult, MAXPTR, ptr1);
+ str_nelem(is->QMcharge, MAXPTR, ptr2);
+ str_nelem(is->bSH, MAXPTR, ptr3);
+ snew(ir->opts.QMmult, nr);
+ snew(ir->opts.QMcharge, nr);
+ snew(ir->opts.bSH, nr);
+
+ for (i = 0; i < nr; i++)
+ {
+ ir->opts.QMmult[i] = strtol(ptr1[i], &endptr, 10);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option QMmult. QMmult should only consist of integers separated by spaces.");
+ }
+ ir->opts.QMcharge[i] = strtol(ptr2[i], &endptr, 10);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option QMcharge. QMcharge should only consist of integers separated by spaces.");
+ }
+ ir->opts.bSH[i] = (gmx_strncasecmp(ptr3[i], "Y", 1) == 0);
+ }
+
+ str_nelem(is->CASelectrons, MAXPTR, ptr1);
+ str_nelem(is->CASorbitals, MAXPTR, ptr2);
+ snew(ir->opts.CASelectrons, nr);
+ snew(ir->opts.CASorbitals, nr);
+ for (i = 0; i < nr; i++)
+ {
+ ir->opts.CASelectrons[i] = strtol(ptr1[i], &endptr, 10);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option CASelectrons. CASelectrons should only consist of integers separated by spaces.");
+ }
+ ir->opts.CASorbitals[i] = strtol(ptr2[i], &endptr, 10);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option CASorbitals. CASorbitals should only consist of integers separated by spaces.");
+ }
+ }
+ /* special optimization options */
+
+ str_nelem(is->bOPT, MAXPTR, ptr1);
+ str_nelem(is->bTS, MAXPTR, ptr2);
+ snew(ir->opts.bOPT, nr);
+ snew(ir->opts.bTS, nr);
+ for (i = 0; i < nr; i++)
+ {
+ ir->opts.bOPT[i] = (gmx_strncasecmp(ptr1[i], "Y", 1) == 0);
+ ir->opts.bTS[i] = (gmx_strncasecmp(ptr2[i], "Y", 1) == 0);
+ }
+ str_nelem(is->SAon, MAXPTR, ptr1);
+ str_nelem(is->SAoff, MAXPTR, ptr2);
+ str_nelem(is->SAsteps, MAXPTR, ptr3);
+ snew(ir->opts.SAon, nr);
+ snew(ir->opts.SAoff, nr);
+ snew(ir->opts.SAsteps, nr);
+
+ for (i = 0; i < nr; i++)
+ {
+ ir->opts.SAon[i] = strtod(ptr1[i], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option SAon. SAon should only consist of real numbers separated by spaces.");
+ }
+ ir->opts.SAoff[i] = strtod(ptr2[i], &endptr);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option SAoff. SAoff should only consist of real numbers separated by spaces.");
+ }
+ ir->opts.SAsteps[i] = strtol(ptr3[i], &endptr, 10);
+ if (*endptr != 0)
+ {
+ warning_error(wi, "Invalid value for mdp option SAsteps. SAsteps should only consist of integers separated by spaces.");
+ }
+ }
+ /* end of QMMM input */
+
+ if (bVerbose)
+ {
+ for (i = 0; (i < egcNR); i++)
+ {
+ fprintf(stderr, "%-16s has %d element(s):", gtypes[i], groups->grps[i].nr);
+ for (j = 0; (j < groups->grps[i].nr); j++)
+ {
+ fprintf(stderr, " %s", *(groups->grpname[groups->grps[i].nm_ind[j]]));
+ }
+ fprintf(stderr, "\n");
+ }
+ }
+
+ nr = groups->grps[egcENER].nr;
+ snew(ir->opts.egp_flags, nr*nr);
+
+ bExcl = do_egp_flag(ir, groups, "energygrp-excl", is->egpexcl, EGP_EXCL);
+ if (bExcl && ir->cutoff_scheme == ecutsVERLET)
+ {
+ warning_error(wi, "Energy group exclusions are not (yet) implemented for the Verlet scheme");
+ }
+ if (bExcl && EEL_FULL(ir->coulombtype))
+ {
+ warning(wi, "Can not exclude the lattice Coulomb energy between energy groups");
+ }
+
+ bTable = do_egp_flag(ir, groups, "energygrp-table", is->egptable, EGP_TABLE);
+ if (bTable && !(ir->vdwtype == evdwUSER) &&
+ !(ir->coulombtype == eelUSER) && !(ir->coulombtype == eelPMEUSER) &&
+ !(ir->coulombtype == eelPMEUSERSWITCH))
+ {
+ gmx_fatal(FARGS, "Can only have energy group pair tables in combination with user tables for VdW and/or Coulomb");
+ }
+
+ decode_cos(is->efield_x, &(ir->ex[XX]));
+ decode_cos(is->efield_xt, &(ir->et[XX]));
+ decode_cos(is->efield_y, &(ir->ex[YY]));
+ decode_cos(is->efield_yt, &(ir->et[YY]));
+ decode_cos(is->efield_z, &(ir->ex[ZZ]));
+ decode_cos(is->efield_zt, &(ir->et[ZZ]));
+
+ for (i = 0; (i < grps->nr); i++)
+ {
+ sfree(gnames[i]);
+ }
+ sfree(gnames);
+ done_blocka(grps);
+ sfree(grps);
+
+}
+
+
+
+static void check_disre(gmx_mtop_t *mtop)
+{
+ gmx_ffparams_t *ffparams;
+ t_functype *functype;
+ t_iparams *ip;
+ int i, ndouble, ftype;
+ int label, old_label;
+
+ if (gmx_mtop_ftype_count(mtop, F_DISRES) > 0)
+ {
+ ffparams = &mtop->ffparams;
+ functype = ffparams->functype;
+ ip = ffparams->iparams;
+ ndouble = 0;
+ old_label = -1;
+ for (i = 0; i < ffparams->ntypes; i++)
+ {
+ ftype = functype[i];
+ if (ftype == F_DISRES)
+ {
+ label = ip[i].disres.label;
+ if (label == old_label)
+ {
+ fprintf(stderr, "Distance restraint index %d occurs twice\n", label);
+ ndouble++;
+ }
+ old_label = label;
+ }
+ }
+ if (ndouble > 0)
+ {
+ gmx_fatal(FARGS, "Found %d double distance restraint indices,\n"
+ "probably the parameters for multiple pairs in one restraint "
+ "are not identical\n", ndouble);
+ }
+ }
+}
+
+static gmx_bool absolute_reference(t_inputrec *ir, gmx_mtop_t *sys,
+ gmx_bool posres_only,
+ ivec AbsRef)
+{
+ int d, g, i;
+ gmx_mtop_ilistloop_t iloop;
+ t_ilist *ilist;
+ int nmol;
+ t_iparams *pr;
+
+ clear_ivec(AbsRef);
+
+ if (!posres_only)
+ {
+ /* Check the COM */
+ for (d = 0; d < DIM; d++)
+ {
+ AbsRef[d] = (d < ndof_com(ir) ? 0 : 1);
+ }
+ /* Check for freeze groups */
+ for (g = 0; g < ir->opts.ngfrz; g++)
+ {
+ for (d = 0; d < DIM; d++)
+ {
+ if (ir->opts.nFreeze[g][d] != 0)
+ {
+ AbsRef[d] = 1;
+ }
+ }
+ }
+ }
+
+ /* Check for position restraints */
+ iloop = gmx_mtop_ilistloop_init(sys);
+ while (gmx_mtop_ilistloop_next(iloop, &ilist, &nmol))
+ {
+ if (nmol > 0 &&
+ (AbsRef[XX] == 0 || AbsRef[YY] == 0 || AbsRef[ZZ] == 0))
+ {
+ for (i = 0; i < ilist[F_POSRES].nr; i += 2)
+ {
+ pr = &sys->ffparams.iparams[ilist[F_POSRES].iatoms[i]];
+ for (d = 0; d < DIM; d++)
+ {
+ if (pr->posres.fcA[d] != 0)
+ {
+ AbsRef[d] = 1;
+ }
+ }
+ }
+ for (i = 0; i < ilist[F_FBPOSRES].nr; i += 2)
+ {
+ /* Check for flat-bottom posres */
+ pr = &sys->ffparams.iparams[ilist[F_FBPOSRES].iatoms[i]];
+ if (pr->fbposres.k != 0)
+ {
+ switch (pr->fbposres.geom)
+ {
+ case efbposresSPHERE:
+ AbsRef[XX] = AbsRef[YY] = AbsRef[ZZ] = 1;
+ break;
+ case efbposresCYLINDERX:
+ AbsRef[YY] = AbsRef[ZZ] = 1;
+ break;
+ case efbposresCYLINDERY:
+ AbsRef[XX] = AbsRef[ZZ] = 1;
+ break;
+ case efbposresCYLINDER:
+ /* efbposres is a synonym for efbposresCYLINDERZ for backwards compatibility */
+ case efbposresCYLINDERZ:
+ AbsRef[XX] = AbsRef[YY] = 1;
+ break;
+ case efbposresX: /* d=XX */
+ case efbposresY: /* d=YY */
+ case efbposresZ: /* d=ZZ */
+ d = pr->fbposres.geom - efbposresX;
+ AbsRef[d] = 1;
+ break;
+ default:
+ gmx_fatal(FARGS, " Invalid geometry for flat-bottom position restraint.\n"
+ "Expected nr between 1 and %d. Found %d\n", efbposresNR-1,
+ pr->fbposres.geom);
+ }
+ }
+ }
+ }
+ }
+
+ return (AbsRef[XX] != 0 && AbsRef[YY] != 0 && AbsRef[ZZ] != 0);
+}
+
+static void
+check_combination_rule_differences(const gmx_mtop_t *mtop, int state,
+ gmx_bool *bC6ParametersWorkWithGeometricRules,
+ gmx_bool *bC6ParametersWorkWithLBRules,
+ gmx_bool *bLBRulesPossible)
+{
+ int ntypes, tpi, tpj;
+ int *typecount;
+ real tol;
+ double c6i, c6j, c12i, c12j;
+ double c6, c6_geometric, c6_LB;
+ double sigmai, sigmaj, epsi, epsj;
+ gmx_bool bCanDoLBRules, bCanDoGeometricRules;
+ const char *ptr;
+
+ /* A tolerance of 1e-5 seems reasonable for (possibly hand-typed)
+ * force-field floating point parameters.
+ */
+ tol = 1e-5;
+ ptr = getenv("GMX_LJCOMB_TOL");
+ if (ptr != NULL)
+ {
+ double dbl;
+
+ sscanf(ptr, "%lf", &dbl);
+ tol = dbl;
+ }
+
+ *bC6ParametersWorkWithLBRules = TRUE;
+ *bC6ParametersWorkWithGeometricRules = TRUE;
+ bCanDoLBRules = TRUE;
+ ntypes = mtop->ffparams.atnr;
+ snew(typecount, ntypes);
+ gmx_mtop_count_atomtypes(mtop, state, typecount);
+ *bLBRulesPossible = TRUE;
+ for (tpi = 0; tpi < ntypes; ++tpi)
+ {
+ c6i = mtop->ffparams.iparams[(ntypes + 1) * tpi].lj.c6;
+ c12i = mtop->ffparams.iparams[(ntypes + 1) * tpi].lj.c12;
+ for (tpj = tpi; tpj < ntypes; ++tpj)
+ {
+ c6j = mtop->ffparams.iparams[(ntypes + 1) * tpj].lj.c6;
+ c12j = mtop->ffparams.iparams[(ntypes + 1) * tpj].lj.c12;
+ c6 = mtop->ffparams.iparams[ntypes * tpi + tpj].lj.c6;
+ c6_geometric = std::sqrt(c6i * c6j);
+ if (!gmx_numzero(c6_geometric))
+ {
+ if (!gmx_numzero(c12i) && !gmx_numzero(c12j))
+ {
+ sigmai = gmx::sixthroot(c12i / c6i);
+ sigmaj = gmx::sixthroot(c12j / c6j);
+ epsi = c6i * c6i /(4.0 * c12i);
+ epsj = c6j * c6j /(4.0 * c12j);
+ c6_LB = 4.0 * std::sqrt(epsi * epsj) * gmx::power6(0.5 * (sigmai + sigmaj));
+ }
+ else
+ {
+ *bLBRulesPossible = FALSE;
+ c6_LB = c6_geometric;
+ }
+ bCanDoLBRules = gmx_within_tol(c6_LB, c6, tol);
+ }
+
+ if (FALSE == bCanDoLBRules)
+ {
+ *bC6ParametersWorkWithLBRules = FALSE;
+ }
+
+ bCanDoGeometricRules = gmx_within_tol(c6_geometric, c6, tol);
+
+ if (FALSE == bCanDoGeometricRules)
+ {
+ *bC6ParametersWorkWithGeometricRules = FALSE;
+ }
+ }
+ }
+ sfree(typecount);
+}
+
+static void
+check_combination_rules(const t_inputrec *ir, const gmx_mtop_t *mtop,
+ warninp_t wi)
+{
+ gmx_bool bLBRulesPossible, bC6ParametersWorkWithGeometricRules, bC6ParametersWorkWithLBRules;
+
+ check_combination_rule_differences(mtop, 0,
+ &bC6ParametersWorkWithGeometricRules,
+ &bC6ParametersWorkWithLBRules,
+ &bLBRulesPossible);
+ if (ir->ljpme_combination_rule == eljpmeLB)
+ {
+ if (FALSE == bC6ParametersWorkWithLBRules || FALSE == bLBRulesPossible)
+ {
+ warning(wi, "You are using arithmetic-geometric combination rules "
+ "in LJ-PME, but your non-bonded C6 parameters do not "
+ "follow these rules.");
+ }
+ }
+ else
+ {
+ if (FALSE == bC6ParametersWorkWithGeometricRules)
+ {
+ if (ir->eDispCorr != edispcNO)
+ {
+ warning_note(wi, "You are using geometric combination rules in "
+ "LJ-PME, but your non-bonded C6 parameters do "
+ "not follow these rules. "
+ "This will introduce very small errors in the forces and energies in "
+ "your simulations. Dispersion correction will correct total energy "
+ "and/or pressure for isotropic systems, but not forces or surface tensions.");
+ }
+ else
+ {
+ warning_note(wi, "You are using geometric combination rules in "
+ "LJ-PME, but your non-bonded C6 parameters do "
+ "not follow these rules. "
+ "This will introduce very small errors in the forces and energies in "
+ "your simulations. If your system is homogeneous, consider using dispersion correction "
+ "for the total energy and pressure.");
+ }
+ }
+ }
+}
+
+void triple_check(const char *mdparin, t_inputrec *ir, gmx_mtop_t *sys,
+ warninp_t wi)
+{
+ char err_buf[STRLEN];
+ int i, m, c, nmol;
+ gmx_bool bCharge, bAcc;
+ real *mgrp, mt;
+ rvec acc;
+ gmx_mtop_atomloop_block_t aloopb;
+ gmx_mtop_atomloop_all_t aloop;
+ t_atom *atom;
+ ivec AbsRef;
+ char warn_buf[STRLEN];
+
+ set_warning_line(wi, mdparin, -1);
+
+ if (ir->cutoff_scheme == ecutsVERLET &&
+ ir->verletbuf_tol > 0 &&
+ ir->nstlist > 1 &&
+ ((EI_MD(ir->eI) || EI_SD(ir->eI)) &&
+ (ir->etc == etcVRESCALE || ir->etc == etcBERENDSEN)))
+ {
+ /* Check if a too small Verlet buffer might potentially
+ * cause more drift than the thermostat can couple off.
+ */
+ /* Temperature error fraction for warning and suggestion */
+ const real T_error_warn = 0.002;
+ const real T_error_suggest = 0.001;
+ /* For safety: 2 DOF per atom (typical with constraints) */
+ const real nrdf_at = 2;
+ real T, tau, max_T_error;
+ int i;
+
+ T = 0;
+ tau = 0;
+ for (i = 0; i < ir->opts.ngtc; i++)
+ {
+ T = std::max(T, ir->opts.ref_t[i]);
+ tau = std::max(tau, ir->opts.tau_t[i]);
+ }
+ if (T > 0)
+ {
+ /* This is a worst case estimate of the temperature error,
+ * assuming perfect buffer estimation and no cancelation
+ * of errors. The factor 0.5 is because energy distributes
+ * equally over Ekin and Epot.
+ */
+ max_T_error = 0.5*tau*ir->verletbuf_tol/(nrdf_at*BOLTZ*T);
+ if (max_T_error > T_error_warn)
+ {
+ sprintf(warn_buf, "With a verlet-buffer-tolerance of %g kJ/mol/ps, a reference temperature of %g and a tau_t of %g, your temperature might be off by up to %.1f%%. To ensure the error is below %.1f%%, decrease verlet-buffer-tolerance to %.0e or decrease tau_t.",
+ ir->verletbuf_tol, T, tau,
+ 100*max_T_error,
+ 100*T_error_suggest,
+ ir->verletbuf_tol*T_error_suggest/max_T_error);
+ warning(wi, warn_buf);
+ }
+ }
+ }
+
+ if (ETC_ANDERSEN(ir->etc))
+ {
+ int i;
+
+ for (i = 0; i < ir->opts.ngtc; i++)
+ {
+ sprintf(err_buf, "all tau_t must currently be equal using Andersen temperature control, violated for group %d", i);
+ CHECK(ir->opts.tau_t[0] != ir->opts.tau_t[i]);
+ sprintf(err_buf, "all tau_t must be postive using Andersen temperature control, tau_t[%d]=%10.6f",
+ i, ir->opts.tau_t[i]);
+ CHECK(ir->opts.tau_t[i] < 0);
+ }
+
+ for (i = 0; i < ir->opts.ngtc; i++)
+ {
+ int nsteps = (int)(ir->opts.tau_t[i]/ir->delta_t);
+ sprintf(err_buf, "tau_t/delta_t for group %d for temperature control method %s must be a multiple of nstcomm (%d), as velocities of atoms in coupled groups are randomized every time step. The input tau_t (%8.3f) leads to %d steps per randomization", i, etcoupl_names[ir->etc], ir->nstcomm, ir->opts.tau_t[i], nsteps);
+ CHECK((nsteps % ir->nstcomm) && (ir->etc == etcANDERSENMASSIVE));
+ }
+ }
+
+ if (EI_DYNAMICS(ir->eI) && !EI_SD(ir->eI) && ir->eI != eiBD &&
+ ir->comm_mode == ecmNO &&
+ !(absolute_reference(ir, sys, FALSE, AbsRef) || ir->nsteps <= 10) &&
+ !ETC_ANDERSEN(ir->etc))
+ {
+ warning(wi, "You are not using center of mass motion removal (mdp option comm-mode), numerical rounding errors can lead to build up of kinetic energy of the center of mass");
+ }
+
+ /* Check for pressure coupling with absolute position restraints */
+ if (ir->epc != epcNO && ir->refcoord_scaling == erscNO)
+ {
+ absolute_reference(ir, sys, TRUE, AbsRef);
+ {
+ for (m = 0; m < DIM; m++)
+ {
+ if (AbsRef[m] && norm2(ir->compress[m]) > 0)
+ {
+ warning(wi, "You are using pressure coupling with absolute position restraints, this will give artifacts. Use the refcoord_scaling option.");
+ break;
+ }
+ }
+ }
+ }
+
+ bCharge = FALSE;
+ aloopb = gmx_mtop_atomloop_block_init(sys);
+ while (gmx_mtop_atomloop_block_next(aloopb, &atom, &nmol))
+ {
+ if (atom->q != 0 || atom->qB != 0)
+ {
+ bCharge = TRUE;
+ }
+ }
+
+ if (!bCharge)
+ {
+ if (EEL_FULL(ir->coulombtype))
+ {
+ sprintf(err_buf,
+ "You are using full electrostatics treatment %s for a system without charges.\n"
+ "This costs a lot of performance for just processing zeros, consider using %s instead.\n",
+ EELTYPE(ir->coulombtype), EELTYPE(eelCUT));
+ warning(wi, err_buf);
+ }
+ }
+ else
+ {
+ if (ir->coulombtype == eelCUT && ir->rcoulomb > 0 && !ir->implicit_solvent)
+ {
+ sprintf(err_buf,
+ "You are using a plain Coulomb cut-off, which might produce artifacts.\n"
+ "You might want to consider using %s electrostatics.\n",
+ EELTYPE(eelPME));
+ warning_note(wi, err_buf);
+ }
+ }
+
+ /* Check if combination rules used in LJ-PME are the same as in the force field */
+ if (EVDW_PME(ir->vdwtype))
+ {
+ check_combination_rules(ir, sys, wi);
+ }
+
+ /* Generalized reaction field */
+ if (ir->opts.ngtc == 0)
+ {
+ sprintf(err_buf, "No temperature coupling while using coulombtype %s",
+ eel_names[eelGRF]);
+ CHECK(ir->coulombtype == eelGRF);
+ }
+ else
+ {
+ sprintf(err_buf, "When using coulombtype = %s"
+ " ref-t for temperature coupling should be > 0",
+ eel_names[eelGRF]);
+ CHECK((ir->coulombtype == eelGRF) && (ir->opts.ref_t[0] <= 0));
+ }
+
+ if (ir->eI == eiSD2)
+ {
+ sprintf(warn_buf, "The stochastic dynamics integrator %s is deprecated, since\n"
+ "it is slower than integrator %s and is slightly less accurate\n"
+ "with constraints. Use the %s integrator.",
+ ei_names[ir->eI], ei_names[eiSD1], ei_names[eiSD1]);
+ warning_note(wi, warn_buf);
+ }
+
+ bAcc = FALSE;
+ for (i = 0; (i < sys->groups.grps[egcACC].nr); i++)
+ {
+ for (m = 0; (m < DIM); m++)
+ {
+ if (fabs(ir->opts.acc[i][m]) > 1e-6)
+ {
+ bAcc = TRUE;
+ }
+ }
+ }
+ if (bAcc)
+ {
+ clear_rvec(acc);
+ snew(mgrp, sys->groups.grps[egcACC].nr);
+ aloop = gmx_mtop_atomloop_all_init(sys);
+ while (gmx_mtop_atomloop_all_next(aloop, &i, &atom))
+ {
+ mgrp[ggrpnr(&sys->groups, egcACC, i)] += atom->m;
+ }
+ mt = 0.0;
+ for (i = 0; (i < sys->groups.grps[egcACC].nr); i++)
+ {
+ for (m = 0; (m < DIM); m++)
+ {
+ acc[m] += ir->opts.acc[i][m]*mgrp[i];
+ }
+ mt += mgrp[i];
+ }
+ for (m = 0; (m < DIM); m++)
+ {
+ if (fabs(acc[m]) > 1e-6)
+ {
+ const char *dim[DIM] = { "X", "Y", "Z" };
+ fprintf(stderr,
+ "Net Acceleration in %s direction, will %s be corrected\n",
+ dim[m], ir->nstcomm != 0 ? "" : "not");
+ if (ir->nstcomm != 0 && m < ndof_com(ir))
+ {
+ acc[m] /= mt;
+ for (i = 0; (i < sys->groups.grps[egcACC].nr); i++)
+ {
+ ir->opts.acc[i][m] -= acc[m];
+ }
+ }
+ }
+ }
+ sfree(mgrp);
+ }
+
+ if (ir->efep != efepNO && ir->fepvals->sc_alpha != 0 &&
+ !gmx_within_tol(sys->ffparams.reppow, 12.0, 10*GMX_DOUBLE_EPS))
+ {
+ gmx_fatal(FARGS, "Soft-core interactions are only supported with VdW repulsion power 12");
+ }
+
+ if (ir->bPull)
+ {
+ gmx_bool bWarned;
+
+ bWarned = FALSE;
+ for (i = 0; i < ir->pull->ncoord && !bWarned; i++)
+ {
+ if (ir->pull->coord[i].group[0] == 0 ||
+ ir->pull->coord[i].group[1] == 0)
+ {
+ absolute_reference(ir, sys, FALSE, AbsRef);
+ for (m = 0; m < DIM; m++)
+ {
+ if (ir->pull->coord[i].dim[m] && !AbsRef[m])
+ {
+ warning(wi, "You are using an absolute reference for pulling, but the rest of the system does not have an absolute reference. This will lead to artifacts.");
+ bWarned = TRUE;
+ break;
+ }
+ }
+ }
+ }
+
+ for (i = 0; i < 3; i++)
+ {
+ for (m = 0; m <= i; m++)
+ {
+ if ((ir->epc != epcNO && ir->compress[i][m] != 0) ||
+ ir->deform[i][m] != 0)
+ {
+ for (c = 0; c < ir->pull->ncoord; c++)
+ {
+ if (ir->pull->coord[c].eGeom == epullgDIRPBC &&
+ ir->pull->coord[c].vec[m] != 0)
+ {
+ gmx_fatal(FARGS, "Can not have dynamic box while using pull geometry '%s' (dim %c)", EPULLGEOM(ir->pull->coord[c].eGeom), 'x'+m);
+ }
+ }
+ }
+ }
+ }
+ }
+
+ check_disre(sys);
+}
+
+void double_check(t_inputrec *ir, matrix box,
+ gmx_bool bHasNormalConstraints,
+ gmx_bool bHasAnyConstraints,
+ warninp_t wi)
+{
+ real min_size;
+ char warn_buf[STRLEN];
+ const char *ptr;
+
+ ptr = check_box(ir->ePBC, box);
+ if (ptr)
+ {
+ warning_error(wi, ptr);
+ }
+
+ if (bHasNormalConstraints && ir->eConstrAlg == econtSHAKE)
+ {
+ if (ir->shake_tol <= 0.0)
+ {
+ sprintf(warn_buf, "ERROR: shake-tol must be > 0 instead of %g\n",
+ ir->shake_tol);
+ warning_error(wi, warn_buf);
+ }
+ }
+
+ if ( (ir->eConstrAlg == econtLINCS) && bHasNormalConstraints)
+ {
+ /* If we have Lincs constraints: */
+ if (ir->eI == eiMD && ir->etc == etcNO &&
+ ir->eConstrAlg == econtLINCS && ir->nLincsIter == 1)
+ {
+ sprintf(warn_buf, "For energy conservation with LINCS, lincs_iter should be 2 or larger.\n");
+ warning_note(wi, warn_buf);
+ }
+
+ if ((ir->eI == eiCG || ir->eI == eiLBFGS) && (ir->nProjOrder < 8))
+ {
+ sprintf(warn_buf, "For accurate %s with LINCS constraints, lincs-order should be 8 or more.", ei_names[ir->eI]);
+ warning_note(wi, warn_buf);
+ }
+ if (ir->epc == epcMTTK)
+ {
+ warning_error(wi, "MTTK not compatible with lincs -- use shake instead.");
+ }
+ }
+
+ if (bHasAnyConstraints && ir->epc == epcMTTK)
+ {
+ warning_error(wi, "Constraints are not implemented with MTTK pressure control.");
+ }
+
+ if (ir->LincsWarnAngle > 90.0)
+ {
+ sprintf(warn_buf, "lincs-warnangle can not be larger than 90 degrees, setting it to 90.\n");
+ warning(wi, warn_buf);
+ ir->LincsWarnAngle = 90.0;
+ }
+
+ if (ir->ePBC != epbcNONE)
+ {
+ if (ir->nstlist == 0)
+ {
+ warning(wi, "With nstlist=0 atoms are only put into the box at step 0, therefore drifting atoms might cause the simulation to crash.");
+ }
+ if (ir->ns_type == ensGRID)
+ {
+ if (gmx::square(ir->rlist) >= max_cutoff2(ir->ePBC, box))
+ {
+ sprintf(warn_buf, "ERROR: The cut-off length is longer than half the shortest box vector or longer than the smallest box diagonal element. Increase the box size or decrease rlist.\n");
+ warning_error(wi, warn_buf);
+ }
+ }
+ else
+ {
+ min_size = std::min(box[XX][XX], std::min(box[YY][YY], box[ZZ][ZZ]));
+ if (2*ir->rlist >= min_size)
+ {
+ sprintf(warn_buf, "ERROR: One of the box lengths is smaller than twice the cut-off length. Increase the box size or decrease rlist.");
+ warning_error(wi, warn_buf);
+ if (TRICLINIC(box))
+ {
+ fprintf(stderr, "Grid search might allow larger cut-off's than simple search with triclinic boxes.");
+ }
+ }
+ }
+ }
+}
+
+void check_chargegroup_radii(const gmx_mtop_t *mtop, const t_inputrec *ir,
+ rvec *x,
+ warninp_t wi)
+{
+ real rvdw1, rvdw2, rcoul1, rcoul2;
+ char warn_buf[STRLEN];
+
+ calc_chargegroup_radii(mtop, x, &rvdw1, &rvdw2, &rcoul1, &rcoul2);
+
+ if (rvdw1 > 0)
+ {
+ printf("Largest charge group radii for Van der Waals: %5.3f, %5.3f nm\n",
+ rvdw1, rvdw2);
+ }
+ if (rcoul1 > 0)
+ {
+ printf("Largest charge group radii for Coulomb: %5.3f, %5.3f nm\n",
+ rcoul1, rcoul2);
+ }
+
+ if (ir->rlist > 0)
+ {
+ if (rvdw1 + rvdw2 > ir->rlist ||
+ rcoul1 + rcoul2 > ir->rlist)
+ {
+ sprintf(warn_buf,
+ "The sum of the two largest charge group radii (%f) "
+ "is larger than rlist (%f)\n",
+ std::max(rvdw1+rvdw2, rcoul1+rcoul2), ir->rlist);
+ warning(wi, warn_buf);
+ }
+ else
+ {
+ /* Here we do not use the zero at cut-off macro,
+ * since user defined interactions might purposely
+ * not be zero at the cut-off.
+ */
+ if (ir_vdw_is_zero_at_cutoff(ir) &&
+ rvdw1 + rvdw2 > ir->rlist - ir->rvdw)
+ {
+ sprintf(warn_buf, "The sum of the two largest charge group "
+ "radii (%f) is larger than rlist (%f) - rvdw (%f).\n"
+ "With exact cut-offs, better performance can be "
+ "obtained with cutoff-scheme = %s, because it "
+ "does not use charge groups at all.",
+ rvdw1+rvdw2,
+ ir->rlist, ir->rvdw,
+ ecutscheme_names[ecutsVERLET]);
+ if (ir_NVE(ir))
+ {
+ warning(wi, warn_buf);
+ }
+ else
+ {
+ warning_note(wi, warn_buf);
+ }
+ }
+ if (ir_coulomb_is_zero_at_cutoff(ir) &&
+ rcoul1 + rcoul2 > ir->rlist - ir->rcoulomb)
+ {
+ sprintf(warn_buf, "The sum of the two largest charge group radii (%f) is larger than rlist (%f) - rcoulomb (%f).\n"
+ "With exact cut-offs, better performance can be obtained with cutoff-scheme = %s, because it does not use charge groups at all.",
+ rcoul1+rcoul2,
+ ir->rlist, ir->rcoulomb,
+ ecutscheme_names[ecutsVERLET]);
+ if (ir_NVE(ir))
+ {
+ warning(wi, warn_buf);
+ }
+ else
+ {
+ warning_note(wi, warn_buf);
+ }
+ }
+ }
+ }
+}
biod.pnpi.spb.ru / alexxy / gromacs.git / commitdiff